3D Printing InfoPrinter comparison
3DGence INDUSTRY F350 vs Bambu Lab P1P
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore 3DGence INDUSTRY F350 comparisonsMore Bambu Lab P1P comparisons
| Property | 3DGence INDUSTRY F350INDUSTRIAL | Bambu Lab P1PCOREXY |
|---|---|---|
| Identity | ||
| Brand | 3DGence | Bambu Lab |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | 3DGence INDUSTRY F350[1] | Bambu Lab P1P. Bambu documents it alongside the P1S in a single two-column parameters table[2] |
| Release date (announcement and actual shipping) | 2021[1] | Not documented |
| Launch MSRP (USD) | From $30,000 (Aniwaa quotes the same figure in EUR)[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Part of 3DGence's INDUSTRY line; Aniwaa's page covers only the F350. No live retail listing with a USD price was found, so the $30,000 figure is a starting price, not a street price[1] | P1P is the open-frame version; the P1S is the same motion platform in an enclosure with plastic and glass panels. Bambu's own comparison table shows what the P1P lacks: control-board fan, chamber temperature regulator fan, auxiliary part-cooling fan and air filter are all listed "Optional" on the P1P and "Closed Loop Control"/"Activated Carbon Filter" on the P1S. The P1P is also lighter, 9.65 kg vs 12.95 kg, and 386 mm deep vs 389 mm. A P1P Enclosure Kit is sold as a spare part. Filament support differs accordingly: ABS/ASA are "Capable" on the P1P but "Ideal" on the P1S[2] |
| Market position: superseded? successor announced? | Not documented | Superseded. No longer listed in the Bambu Lab US store 3D-printer collection in Aug 2026 (the collection carries A1, A1 mini, A2L, P1S, P2S, X2D, H2S, H2D, H2C); /products/p1p redirects to the collection page and only P1P spare parts remain in the store sitemap. No live first-party price could therefore be recorded[3][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 40.46 L (340 x 340 x 350 mm)[1] | 256 x 256 x 256 mm advertised. Bambu's own footnote limits the default printable height in Bambu Studio to 250 mm to avoid heatbed collisions, and warns that the collapsible filament-cutter stopper takes part of the printing area when popped out[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1825 x 960 x 940 mm[1] | 386 x 389 x 458 mm (P1P). Bambu prints P1P and P1S dimensions in the same cell - the P1S is 389 x 389 x 458 mm[2] |
| Net weight (kg) | 335 kg[1] | 9.65 kg net, 14.30 kg gross[2] |
| Frame construction & material | Not documented | Open frame; Bambu offers printable mod-plates for the side panels[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber[1] | Open frame. An official P1P Enclosure Kit exists as a spare part, and the enclosed version of the same platform is sold as the P1S[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 140 °C maximum chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two extruders; kinematic layout not stated on the source checked[1] | CoreXY driven by two stepper motors, each with its own belt to the printhead. Bambu's wiki states the P1P and P1S share the same motion system[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three leadscrews driven from a single stepper motor through a belt; the whole bed drops in Z. There is no motorised Z-tilt - bed tramming is by three manual knobs under the bed[4] |
| Belts (type, width, e.g. Gates?) | Not documented | Adjustable belt tensioners at the rear; a Belt Tension Monitor reports when tension drifts out of range[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 500 mm/s max toolhead speed (manufacturer claim); no independent measurement found[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 20 m/s2 = 20000 mm/s2 max toolhead acceleration (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | Direct drive; Bambu sells a "Stainless Steel Extruder Unit (P1 series)" as the service part[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal all-in-one hotend: the nozzle is integrated into the heatblock and joined to the heatsink by a thin metal tube, so the hotend is replaced as a unit. 0.4 mm stainless-steel nozzle included; 0.2/0.6/0.8 mm optional[2][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | 300 C claimed max hot-end temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C maximum bed temperature[1] | 100 C max build-plate temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Textured PEI plate; Cool Plate, Engineering Plate and High Temperature Plate compatible[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Nozzle-touch probing against three ceramic force (piezo) sensors under the heatbed: Z homing works by detecting the force of the nozzle contacting the heatbed. Three manual levelling knobs are also fitted[5][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Yes - filament run-out sensor[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Compatible with AMS and the AMS hub, up to 16 colours with four AMS units[4] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Part-cooling fan fitted; the control-board fan, chamber temperature regulator fan and auxiliary part-cooling fan that the P1S has under closed-loop control are all listed as Optional on the P1P[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Closed-source proprietary firmware - not a Klipper or Marlin derivative, and no printer-firmware source is published. The bambulab GitHub organisation carries 11 repositories (Bambu Studio, wxWidgets/boost/ffmpeg forks, the wiki); none is printer firmware. Updates are delivered over the air via Bambu Studio / Bambu Handy[6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 2.7-inch 192x64 monochrome screen, not a touchscreen - control is by button, app or PC application[4] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | Button-driven on-device UI on a 192x64 monochrome panel; most interaction is expected to happen in Bambu Studio or Bambu Handy[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi, Bluetooth and Bambu-Bus; microSD card storage; 5 V/1.5 A USB output power[4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Low-rate chamber monitoring camera, 1280x720 at 0.5 fps, timelapse supported - the 0.5 fps figure is Bambu's own and is far below video rate[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PET, PA6, PA-CF, PEEK and various composites[1] | Ideal: PLA, PETG, TPU, PVA, PET. Capable: PA, PC, ABS, ASA - the open frame is the limiting factor, and the same table upgrades ABS/ASA to Ideal for the enclosed P1S[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year limited warranty for consumers in the US, Canada, the EU, Switzerland, Norway and Iceland; 1 year in the rest of the world. Bambu Lab's own policy records the US/Canada term as a 2026 extension from one year to two[7] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- 3DGence INDUSTRY F350 specification page aniwaa.com · 2026-08 · doc
- Bambu Lab P1S store page - 'Parameters Comparison' table giving P1P and P1S in separate columns us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab US Store - 3D Printers collection listing (base prices, Aug 2026) us.store.bambulab.com · 2026-08 · vendor
- Bambu Lab Wiki - Introduction to P1 series wiki.bambulab.com · 2026-08 · doc
- Bambu Lab Wiki - Replace the Heatbed Sensor Unit / Heatbed Piezo Interface Board wiki.bambulab.com · 2026-08 · doc
- GitHub - bambulab organisation repository list (11 repos, checked Aug 2026) github.com · 2026-08 · doc
- Bambu Lab Warranty Policy bambulab.com · 2026-08 · vendor