3D Printing InfoPrinter comparison
Stratasys F270 vs UltiMaker S8
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Stratasys F270 comparisonsMore UltiMaker S8 comparisons
| Property | Stratasys F270INDUSTRIAL | UltiMaker S8INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Stratasys | UltiMaker |
| Class | INDUSTRIAL | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Stratasys F270, part of the Stratasys F123 Series[1] | UltiMaker S8 3D Printer[2][3] |
| Release date (announcement and actual shipping) | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[1] | Launched March 2025; the technical-specification and pricing announcement is dated 14 March 2025[3] |
| Street price (USD; dated snapshot per entry) | Not documented | Starting at $8,999 at MatterHackers, in stock, checked Aug 2026. The launch announcement quoted approximately $9,000[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Middle of the full-cabinet trio. Same materials as the F170 but a larger build size; the F370 adds ABS-ESD7, PC-ABS and Diran 410MF07 and is the only model with Insight and DoD STIG compliance. All three full-cabinet models share the same 1,626 x 864 x 711 mm footprint and 227 kg weight[1] | Sold as printer-only or as a Pro Bundle. The bundle is not a trim level but a different machine footprint and weight: 495 x 500 x 1210.5 mm and 47.7 kg with the 6-spool Material Station, versus 495 x 585 x 800.5 mm and 30 kg for the printer alone. Print cores AA+ 0.40 x2 are included; BB, CC+ and DD 0.40 are separate purchases[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 305 x 254 x 305 mm (12 x 10 x 12 in)[1] | 330 x 240 x 300 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[1] | 495 x 585 x 800.5 mm printer only; 495 x 500 x 1210.5 mm as the Pro Bundle[2][3] |
| Net weight (kg) | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[1] | 30 kg printer only; 47.7 kg as the Pro Bundle[2][3] |
| Frame construction & material | Fully enclosed office/classroom-grade cabinet, factory assembled[1] | Fully assembled, made in Europe[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed build chamber[1] | Enclosed, with an Air Manager UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Build-volume temperature under 50 °C with open-loop control (manufacturer figure)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Dual-extrusion print head with auto nozzle-lifting, flood detection and inductive probing. UltiMaker's Cheetah motion planner uses third-order continuous motion with corner blending[2][3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | Up to 500 mm/s in XY (manufacturer claim)[2][3] |
| Max acceleration (claimed, mm/s²) | Not documented | Up to 50,000 mm/s2 (manufacturer claim)[2][3] |
| Jerk / square-corner-velocity setting (exact value) | Not documented | Jerk up to 100,000,000 mm/s3 (manufacturer claim)[2][3] |
| Max volumetric flow claimed (mm³/s) | Not documented | Up to 35 mm3/s extrusion flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Dual gripper feeder with tension adjustment, release function and filament feed-rate control[2][3] |
| Filament diameter | Not documented | 2.85 mm[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Swappable print cores; AA+ 0.40 x2 included, BB 0.40 / CC+ 0.40 / DD 0.40 sold separately[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | Up to 340 °C (manufacturer claim)[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | Up to 120 °C on a flexible PEI plate (manufacturer claim)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible PEI plate[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Inductive probing, integrated into the print head[2][3] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Not documented | Dual spool holder with NFC recognition on the printer; the Pro Bundle substitutes a 6-spool Material Station with NFC and a dual-geared abrasion-resistant feeder[2][3] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air Manager, which UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[1] | Not published; print preparation is UltiMaker Cura 5.10 or newer, fleet management via UltiMaker Digital Factory[2][3] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[1] | Wi-Fi 2.4 and 5 GHz (802.11a/b/g/n/ac), Gigabit Ethernet, USB 2.0[2][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Full HD HDR camera[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS-M30, ASA, FDM TPU 92A, ABS-CF10, with QSR soluble support[1] | UltiMaker cites 301+ compatible materials including its own PLA, PETG, ABS, CPE, CPE+, PC, TPU and PET-CF, plus third-party grades[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[1] | Under 50 dBA operating sound, manufacturer figure. No independent measurement; distance and method not stated[2][3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 12 months, extendable to 5 years with an UltiMakerCare plan[2][3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[1] | Dimensional accuracy +/-0.15 mm +/-0.15% of feature nominal length (manufacturer specification, not an independent measurement)[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review