3D Printing InfoPrinter comparison
Sovol SV08 vs Stratasys F370
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV08 comparisonsMore Stratasys F370 comparisons
| Property | Sovol SV08COREXY | Stratasys F370INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Sovol | Stratasys |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV08 3D Printer[1][2] | Stratasys F370, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[2][4][5][1] | Top of the series and the only one with ABS-ESD7, PC-ABS and Diran 410MF07, an Insight software licence, and ProtectAM with US DoD STIG compliance on Red Hat Enterprise Linux. Cabinet and weight are identical to the F170 and F270, so footprint tells you nothing about which model you have[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 345 mm advertised[1][5] | 355 x 254 x 355 mm (14 x 10 x 14 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[1][5] | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[3] |
| Net weight (kg) | 21.5 kg gross (3DJake). Sovol does not publish a net weight[5] | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[1] | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[1][4] | Enclosed build chamber[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 700 mm/s maximum (manufacturer claim)[1][5] | Not documented |
| Max acceleration (claimed, mm/s²) | 40,000 mm/s2 maximum (manufacturer claim)[1][5] | Not documented |
| Max volumetric flow claimed (mm³/s) | <=30 mm3/s (manufacturer claim)[1][5] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Planetary-gear direct-drive extruder[1][5] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1][5] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=100 °C claimed[1][5] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Powder-coated PEI steel plate[1][5] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[1][5][2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor fitted, with filament-runout resume; type and location not published[1][5] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[1][5] | Not documented |
| PSU (brand, wattage, rail voltage) | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[1][5] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[1][5] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[1][5] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[1][5] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PETG-CF, ABS and others[1] | PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF072, FDM TPU 92A, PC-ABS, ABS-CF10, with QSR soluble support. Diran and PLA use breakaway rather than soluble support[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor