3D Printing InfoPrinter comparison
Sovol SV07 vs Voron 2.4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
| Property | Sovol SV07BEDSLINGER | Voron 2.4COREXY |
|---|---|---|
| Identity | ||
| Brand | Sovol | Voron Design |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV07[1][2] | Voron 2.4, current revision R2, kits shipping as Rev D and Rev D+. Sold as "Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO"[3][4] |
| Street price (USD; dated snapshot per entry) | $299 at 3D Printers Online Store but Out of Stock, checked Aug 2026. Sovol's own comparison article quotes $259. No in-stock listing found[2][5] | $1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US[3][6][7] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base of a two-model pair with the SV07 Plus (300x300x350, 600 W MeanWell PSU, 25-point levelling, adds USB Type-C). The SV07 has a 350 W MeanWell PSU. Both are quoted by Sovol at 500 mm/s and 300 °C, so PSU wattage and build volume are the reliable discriminators[5][2][8] | Sizes 250, 300 and 350 mm; LDO ships Rev D and Rev D+. Colours black, space grey, blue. Do not confuse with the Trident: the 2.4 lifts the whole gantry on four belted Z motors, the Trident lifts the bed on three screws. The Rev D+ kit includes a Raspberry Pi 4B; the older 3DJake-listed RevD kit explicitly does not include a Pi[3][4][7][9] |
| Market position: superseded? successor announced? | Delisted by Sovol; not present in the current 3D-printer collection. 3DJake shows it sold out and no longer stocked[10][1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 220 x 220 x 250 mm advertised[1][2] | 300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit[3][4][7] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 460 x 457 x 625 mm[2] | Not documented |
| Net weight (kg) | 9.8 kg machine weight; 12.9 kg boxed[2] | Not documented |
| Frame construction & material | Open frame, supplied as an assembly kit[1] | Blind-joint aluminium-extrusion frame with a complete panel set; stainless-steel linear rails throughout[4][7] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame; 3DJake records "Heated chamber: No"[1] | Enclosed by the supplied panel set. A Nevermore Micro V5 internal circulation filter is included in the LDO kit[7] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | CoreXY on linear rails, with a belted flying gantry on four Z motors[4][3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers, ready for 48 V upgrades[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Conflicting manufacturer figures: Sovol's own comparison says up to 500 mm/s, 3DJake's feature text says up to 250 mm/s, and the retailer listing gives a 250-500 mm/s range. 500 is the headline claim, 250 the working figure[5][1][2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | All-metal dual-gear direct drive with a planetary gearbox[1][5] | Clockwork 2 with a Bondtech BMG / Integrated Drive Gear Assembly, in a Stealthburner toolhead[3][4][7] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | All-metal hotend to 300 °C[1][5] | E3D Revo Voron (24 V), all-metal, high-flow variant in the Rev D+ kit, with a 60 W heater; upgradeable to a Phaetus Rapido HF for $9.99[3][4][7] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1][2][5] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater)[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=100 °C claimed[2] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Reversible PEI build plate[1] | Cast 5083 aluminium plate with a magnetic base and a powder-coated PEI sheet; LDO silicone bed heater with edge-to-edge heating[4][3][7] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling over 25 points; probe technology not stated[1] | Omron inductive probe supplied; Klicky-mod parts included. Voron Tap is available as an add-on rather than standard[3][4] |
| Mesh grid size (probe point count — firmware evidence) | 25 points (manufacturer claim)[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Triple-fan cooling (Sovol's description; fan sizes and duct design not published)[1][5] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO x Voron Leviathan mainboard (replacing the earlier BTT Octopus), plus a Nitehawk SB USB toolhead PCB[4][3][7] |
| PSU (brand, wattage, rail voltage) | 350 W MeanWell, 24 V, 115/230 V AC input[5][2] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[1][5] | Klipper, hosted on a Raspberry Pi 4B (included in the Fabreeko Rev D+ kit, not in the older 3DJake RevD kit)[3][4][7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen (Sovol markets it as a "5-inch HD Klipper screen")[1][5] | 4.3-inch touchscreen included in the LDO kit[7] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB Type-C[1][5][2] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED strips included[3][7] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; some parts must be printed by the user, and the LDO kit supplies pre-cut, pre-crimped cables and a heat-set insert soldering tip[7] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[2][5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV07 technical data table 3djake.com · 2026-08 · vendor
- Sovol SV07 Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
- LDO Voron 2.4 R2 (Rev D) kit listing matterhackers.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- LDO Motors Voron 2.4 350 RevD kit contents 3djake.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor