3D Printing InfoPrinter comparison
Sovol SV06 Plus vs Sovol Zero
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV06 Plus comparisonsMore Sovol Zero comparisons
| Property | Sovol SV06 PlusBEDSLINGER | Sovol ZeroCOREXY |
|---|---|---|
| Identity | ||
| Brand | Sovol | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus[1] | Sovol Zero 3D Printer[2][3] |
| Street price (USD; dated snapshot per entry) | Not documented | $389.00 on sovol3d.com against a $499.00 compare-at price, but marked Sold out, checked Aug 2026. Sovol's own announcement article quotes from $359.00[2][3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[1][5] | No sibling variants at the time of checking. Sovol positions it against the Voron 0 and Bambu Lab P1P. Note the bed and nozzle limits are higher than the larger SV08 (120 vs 100 °C bed, 350 vs 300 °C nozzle), so SV08 figures must not be carried across[2][4][6] |
| Market position: superseded? successor announced? | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[3][1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[1] | 152.4 x 152.4 x 152.5 mm advertised[2][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 345 x 420 x 475 mm[2] |
| Frame construction & material | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[1] | Full linear rails on all axes; CoreXY with two motors sharing the moving mass[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | CoreXY[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rails on all axes[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 1200 mm/s maximum (manufacturer claim). Sovol's own material acknowledges 700 mm/s as the realistic figure for detailed prints[2][4] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[2][4] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=50 mm3/s (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single[1] | Planetary-gear direct-drive extruder[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate. Brass or hardened-steel nozzles in 0.2/0.4/0.6/0.8/1.0 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=350 °C claimed[2][4] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass or hardened steel, buyer's choice[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed; Sovol states the bed is AC-heated[2][4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided PEI steel plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Eddy-current scanning combined with pressure (force) sensing — Sovol describes it as an inductive sensor plus force sensor[2][4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor fitted; type and location not published[2][4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616, 1 GB RAM, 8 GB eMMC, 64-bit[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 150 W / 24 V (this is the DC supply; the bed is separately AC-heated per Sovol)[2][4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named on the product page beyond OTA updates and OrcaSlicer support; Sovol markets the machine as open source[2][4] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB connection and mini-SD card[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 not supported)[2][4] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Built-in camera for monitoring; resolution not published[2][4] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Arrives preassembled[4] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2][4] |
| Materials Support | ||
| Officially supported filament list | 1.75 mm filament; no per-material list published on the listing[1] | PLA, PETG, TPU, PETG-CF, ABS, ASA, PA, PC[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol Zero 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol Zero announcement article (Sovol blog) sovol3d.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor