3D Printing InfoPrinter comparison
Sovol SV06 Plus ACE vs Stratasys F170
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV06 Plus ACE comparisonsMore Stratasys F170 comparisons
| Property | Sovol SV06 Plus ACEBEDSLINGER | Stratasys F170INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Sovol | Stratasys |
| Class | BEDSLINGER | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus ACE 3D Printer[1][2] | Stratasys F170, part of the Stratasys F123 Series[3] |
| Release date (announcement and actual shipping) | Not documented | The F123 series spec sheet carried is revision 0721a (July 2021). Stratasys does not print a launch date on it[3] |
| Street price (USD; dated snapshot per entry) | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[1][2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[1][2][4] | Shares its 254 mm cube with the F120 but is a different machine: full-size cabinet, 2 internal material spool bays (1 model, 1 support) in a front drawer, and five model materials. The F270 and F370 have 4 spool bays[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 350 mm advertised[1] | 254 x 254 x 254 mm (10 x 10 x 10 in)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 510 x 575 x 710 mm including screen and filament holder[1] | 1,626 x 864 x 711 mm (64 x 34 x 28 in)[3] |
| Net weight (kg) | Not documented | 124 kg (F120) or 227 kg with consumables (F170, F270, F370)[3] |
| Frame construction & material | Open i3-style frame; Sovol publishes no frame-material breakdown[1] | Fully enclosed office/classroom-grade cabinet, factory assembled[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosed build chamber[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 15,000 mm/s2 maximum (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Planetary double-gear direct drive, 1:7.5 reduction[1] | Not documented |
| Gear ratio & drive gear material | 1:7.5[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C claimed[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted; type and location not published[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[1] | Not documented |
| PSU (brand, wattage, rail voltage) | 500 W / 24 V, 100-240 VAC 50/60 Hz[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-132 V / 15 A or 200-240 V / 7 A, 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[1] | Proprietary Stratasys firmware; print preparation is GrabCAD Print. The F370 additionally carries an Insight software licence and DoD STIG compliance powered by Red Hat Enterprise Linux[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[1] | Wired TCP/IP at 100 Mbps minimum, 100base-T Ethernet, RJ45. Wireless-ready IEEE 802.11 n/g/b with WPA2-PSK or 802.1x EAP, CCMP/TKIP encryption[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA[1] | PLA, ABS-M30, ASA, FDM TPU 92A, ABS-CF10, with QSR soluble support. PLA uses breakaway PLA support rather than soluble[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | CE (low-voltage and EMC directives), FCC, EAC, cTUVus, KC, RoHS, WEEE, REACH, RCM[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | 46 dB maximum during build, 35 dB idle — manufacturer specification, no distance or method stated, and not an independent measurement[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Parts produced within +/-0.200 mm or +/-0.002 mm/mm, whichever is greater. Manufacturer figure derived from statistical data at 95% dimensional yield; Z accuracy carries an extra -0.000/+slice-height tolerance[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Stratasys F123 Series product specification sheet (PSS_FDM_F123Series_0721a, PDF) stratasys.com · 2026-08 · doc
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor