3D Printing InfoPrinter comparison
Sovol SV06 Plus ACE vs Sovol SV08 Max
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Sovol SV06 Plus ACE comparisonsMore Sovol SV08 Max comparisons
| Property | Sovol SV06 Plus ACEBEDSLINGER | Sovol SV08 MaxCOREXY |
|---|---|---|
| Identity | ||
| Brand | Sovol | Sovol |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Sovol SV06 Plus ACE 3D Printer[1][2] | Sovol SV08 Max 3D Printer[3][2] |
| Street price (USD; dated snapshot per entry) | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[1][2] | $1,099.00 on sovol3d.com against a $1,299.00 compare-at price (15% off), in stock, checked Aug 2026[3][2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[1][2][4] | Much larger sibling of the SV08. Differences that matter in a spec box: 500x500x500 vs 350x350x345, 50 vs 30 mm3/s, TMC5160 XY drivers vs TMC2209, CAN bus, HDMI output, dual 0.4 mm nozzles in the box, and a separately sold chamber-heating module. A chamber heating module for the SV08 Max is listed at $69[3][5][6][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 350 mm advertised[1] | 500 x 500 x 500 mm advertised[3][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 510 x 575 x 710 mm including screen and filament holder[1] | 700 x 710 x 750 mm excluding the spool holder. Shipping cartons: 810 x 820 x 360 mm plus a 775 x 728 x 155 mm enclosure-kit box[3][5] |
| Frame construction & material | Open i3-style frame; Sovol publishes no frame-material breakdown[1] | Aluminium-extrusion CoreXY frame supplied as a kit; Sovol ships it in two cartons, one of which is an enclosure kit[3] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Enclosure kit shipped with the machine (separate carton). A chamber-heating module is sold separately at $69[3][2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian i3 bedslinger[1] | CoreXY[3][5] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Z axis 4 x TMC2209; A axis 1 x TMC5160; B axis 1 x TMC5160. Toolhead communication over CAN bus[3][5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum (manufacturer claim)[1] | 700 mm/s maximum (manufacturer claim)[3][5] |
| Max acceleration (claimed, mm/s²) | 15,000 mm/s2 maximum (manufacturer claim)[1] | 40,000 mm/s2 maximum (manufacturer claim)[3][5] |
| Max volumetric flow claimed (mm³/s) | Not documented | 50 mm3/s maximum (manufacturer claim)[3][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Planetary double-gear direct drive, 1:7.5 reduction[1] | Direct drive with auxiliary (assisted) filament feeding[3][5] |
| Gear ratio & drive gear material | 1:7.5[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[1] | Ceramic heater. Two 0.4 mm nozzles supplied as standard; 0.4/0.6/0.8 mm optional[3][5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1] | <=300 °C claimed[3][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C claimed[1] | <=100 °C claimed[3][5] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[1] | Not stated on the SV08 Max page; the SV08 family uses an inductive sensor plus pressure sensor[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted; type and location not published[1] | Filament runout detection plus filament tangle/clog detection. Sovol does not describe the tangle or clog mechanism[3][5] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[1] | 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[3][5] |
| PSU (brand, wattage, rail voltage) | 500 W / 24 V, 100-240 VAC 50/60 Hz[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[1] | Klipper (3DJake's table renders it as "Clipper"). OrcaSlicer is the supported slicer[3][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch capacitive touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[1] | USB, Wi-Fi 2.4 GHz and 5 GHz, HDMI, Ethernet[3][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[1] | Power-loss resume printing supported; mechanism not published[3][5] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, TPU, PVA[1] | 1.75 mm filament; Sovol does not publish a per-material list on this page[3][5] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 Max technical data table 3djake.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor