3D Printing InfoPrinter comparison
Snapmaker U1 vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Snapmaker U1 comparisonsMore Sovol SV06 Plus comparisons
| Property | Snapmaker U1TOOLCHANGER | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Snapmaker | Sovol |
| Class | TOOLCHANGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Snapmaker U1 3D Printer[1] | Sovol SV06 Plus[2] |
| Street price (USD; dated snapshot per entry) | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[1] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[2][3] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[4][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 270 x 270 x 270 mm[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 584 x 499 x 730 mm[1] | Not documented |
| Net weight (kg) | 18.2 kg[1] | Not documented |
| Frame construction & material | Not documented | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open as sold; a top cover is an optional accessory that raises the supported material range[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[1] | Cartesian i3 bedslinger[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 500 mm/s maximum toolhead speed (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 32 mm3/s maximum hotend flow (manufacturer claim)[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Input shaping with an accelerometer, run as a calibration routine[1] | Not documented |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Pressure advance, with automatic flow compensation calibration[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct-drive extruder, single[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum (manufacturer claim)[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Stainless steel as standard; hardened steel needed for fibre-filled grades[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C maximum (manufacturer claim)[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel sheet with a PEI surface[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out detection, plus air-printing detection and RFID filament recognition[1] | Not documented |
| Multi-material/multi-color capability or official upgrade path | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Main plus auxiliary part-cooling fans[1] | Not documented |
| Electronics & Power | ||
| Total rated power draw | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch, 320 x 480 touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[1] | USB connection and mini-SD card[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 2 MP built-in chamber camera for live view[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery supported; mechanism not published[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[1] | 1.75 mm filament; no per-material list published on the listing[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor