3D Printing InfoPrinter comparison
Snapmaker J1s vs Sovol SV07 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Snapmaker J1s comparisonsMore Sovol SV07 Plus comparisons
| Property | Snapmaker J1sIDEX | Sovol SV07 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Snapmaker | Sovol |
| Class | IDEX | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Snapmaker J1S High Speed IDEX 3D Printer[1][2] | Sovol SV07 Plus[3][4] |
| Street price (USD; dated snapshot per entry) | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[1] | $199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[1][2] | Large-format version of the SV07. Distinguishers: 300x300x350 mm vs 220x220x250, 600 W MeanWell vs 350 W, 25-point levelling, and USB Type-C added. Both are quoted at 500 mm/s and 300 °C. Note Sovol's own comparison table gives 300x300x350 while some listings write 300x300x340[4][3] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection[5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 200 x 200 mm in default and backup modes[1] | 300 x 300 x 350 mm advertised[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 539 x 401 x 464 mm[1] | 632 x 532 x 735 mm[3] |
| Net weight (kg) | 25 kg net[1] | 14 kg[3] |
| Frame construction & material | Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[2] | Open frame, assembly kit[4] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Open frame, no enclosure[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders[1][2] | Cartesian i3 bedslinger[4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear rails[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 350 mm/s maximum (manufacturer claim)[2] | Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range[4][3] |
| Max acceleration (claimed, mm/s²) | 10,000 mm/s2 maximum (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Dual-gear direct drive with planetary gearbox[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend to 300 °C, 0.4 mm nozzle[4][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum (manufacturer claim)[1][2] | <=300 °C claimed[4][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C maximum (manufacturer claim)[1] | <=100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[1][2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[2] | 25-point automatic levelling; probe technology not stated[4] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[4] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Enhanced triple cooling (Sovol's wording; no fan detail published)[4] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[1] | Not documented |
| PSU (brand, wattage, rail voltage) | Not documented | 600 W MeanWell, 24 V, 115/230 V AC input[4][3] |
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[1] | Not documented |
| Total rated power draw | 400 W maximum output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[1] | Klipper[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch Android display, 1280 x 720[1] | 5-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB cable, USB flash drive[1] | Wi-Fi, USB and USB Type-C[4][3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[1] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][4] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker J1s product page snapmaker.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor