3D Printing InfoPrinter comparison
Snapmaker J1s vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Snapmaker J1s comparisonsMore Sovol SV06 Plus comparisons
| Property | Snapmaker J1sIDEX | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Snapmaker | Sovol |
| Class | IDEX | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Snapmaker J1S High Speed IDEX 3D Printer[1][2] | Sovol SV06 Plus[3] |
| Street price (USD; dated snapshot per entry) | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[1][2] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[3][4] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[5][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 200 x 200 mm in default and backup modes[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 539 x 401 x 464 mm[1] | Not documented |
| Net weight (kg) | 25 kg net[1] | Not documented |
| Frame construction & material | Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[2] | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[3] |
| Enclosure: open / enclosed; panel material; door/lid | Not documented | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders[1][2] | Cartesian i3 bedslinger[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear rails[2] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 350 mm/s maximum (manufacturer claim)[2] | Not documented |
| Max acceleration (claimed, mm/s²) | 10,000 mm/s2 maximum (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct-drive extruder, single[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum (manufacturer claim)[1][2] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 100 °C maximum (manufacturer claim)[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[1][2] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[2] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[1] | Not documented |
| Total rated power draw | 400 W maximum output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch Android display, 1280 x 720[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB cable, USB flash drive[1] | USB connection and mini-SD card[3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[1] | 1.75 mm filament; no per-material list published on the listing[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker J1s product page snapmaker.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor