3D Printing InfoPrinter comparison
Snapmaker Artisan vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Snapmaker Artisan comparisonsMore Voron 0.2 comparisons
| Property | Snapmaker ArtisanIDEX | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | Snapmaker | Voron Design |
| Class | IDEX | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[1] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[2][3] |
| Street price (USD; dated snapshot per entry) | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[1] | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[1] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[1] | 120 x 120 x 120 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[1] | Not documented |
| Net weight (kg) | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[1] | Not documented |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[1] | Enclosed by acrylic panels in the LDO kit[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven print heads[1] | CoreXY with the build plate moving in Z[2][3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Z-axis lead 8 mm; X and Y leads 40 mm[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | TMC2209[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[1] | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum (manufacturer claim)[1] | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[3] |
| Stock nozzle size & sizes included in box | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Brass standard, hardened steel optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[1] | 110 °C (Formbot kit listing)[3] |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided textured PEI sheet[1] | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[2][3] |
| Total rated power draw | Integrated controller rated 300 W + 450 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB cable, USB flash drive[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor