3D Printing InfoPrinter comparison
Raise3D Pro3 vs VzBoT AWD 330
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Raise3D Pro3 comparisonsMore VzBoT AWD 330 comparisons
| Property | Raise3D Pro3IDEX | VzBoT AWD 330COREXY |
|---|---|---|
| Identity | ||
| Brand | Raise3D | VzBoT |
| Class | IDEX | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Raise3D Pro3 3D Printer[1][2] | VzBoT AWD 330, also written Vz330. Sold as "DIY VzBoT AWD 330 VZ330 3D Printer Kit" by Mellow[3] |
| Street price (USD; dated snapshot per entry) | $2,999.00 on Raise3D's own store, available, checked Aug 2026[2] | $1,360.00 at Mellow, available and shipping from China, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[2][4][1] | Ordered by colour (black or silver) and mains voltage (110 V or 220 V). Mellow describes the kit as a test version that still requires the buyer to print some components, and the 5-inch DSI screen requires a host computer that supports DSI — neither is included[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[1] | 330 x 330 x 400 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 620 x 626 x 760 mm[1] | 530 x 500 x 720 mm body dimensions[3] |
| Net weight (kg) | 52.5 kg net[1] | 31 kg net, 36 kg gross[3] |
| Frame construction & material | Fully assembled enclosed professional chassis[1] | CNC-machined all-metal frame with carbon-rod components[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a HEPA and activated-charcoal filter[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Dual-head with an electronic lifting system[1] | CoreXY in an AWD (all-wheel drive) arrangement — two motors on X and two on Y, four in total for the XY plane, each on its own external driver[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | LDO 9 mm rail on X; LDO 12 mm dual rails on Y; 10 mm optical shafts on Z[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Four external TMC5160 drivers for the LDO XY motors[3] |
| Speed & Acceleration | ||
| Max travel speed | Print-head travel speed 30-150 mm/s (manufacturer figure)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual print heads, 1.75 mm filament[1] | Lightweight all-metal direct drive with a twill drive wheel[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | VZ High Speed hotend[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum nozzle temperature[1] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum build-plate temperature, silicone heater[1] | 120 °C maximum bed temperature (manufacturer claim)[3] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 750 W silicone bed heater on an 8 mm aluminium plate[3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate with BuildTak[1] | 8 mm aluminium plate with a magnetic spring-steel PEI-coated sheet[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Mesh levelling with flatness detection[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | HEPA filter with activated charcoal[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[1] | 32-bit mainboard, quoted by Mellow at 550 Hz. Exact board model not named on the listing[3] |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB onboard flash, embedded Linux[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[1] | Not documented |
| Total rated power draw | 600 W output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[1] | Klipper or RepRapFirmware[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | 5-inch DSI display; requires a compatible host computer, which is not included[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB 2.0 x2; live camera[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live camera fitted; resolution not published[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit; some parts must be printed by the buyer[3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[1] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- VzBoT AWD 330 kit (Mellow) 3dmellow.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor