3D Printing InfoPrinter comparison
Raise3D Pro3 vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Raise3D Pro3 comparisonsMore Sovol SV06 Plus comparisons
| Property | Raise3D Pro3IDEX | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Raise3D | Sovol |
| Class | IDEX | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Raise3D Pro3 3D Printer[1][2] | Sovol SV06 Plus[3] |
| Street price (USD; dated snapshot per entry) | $2,999.00 on Raise3D's own store, available, checked Aug 2026[2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[2][4][1] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[3][5] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[6][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 620 x 626 x 760 mm[1] | Not documented |
| Net weight (kg) | 52.5 kg net[1] | Not documented |
| Frame construction & material | Fully assembled enclosed professional chassis[1] | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a HEPA and activated-charcoal filter[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Dual-head with an electronic lifting system[1] | Cartesian i3 bedslinger[3] |
| Speed & Acceleration | ||
| Max travel speed | Print-head travel speed 30-150 mm/s (manufacturer figure)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual print heads, 1.75 mm filament[1] | Direct-drive extruder, single[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum nozzle temperature[1] | Not documented |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum build-plate temperature, silicone heater[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate with BuildTak[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Mesh levelling with flatness detection[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | HEPA filter with activated charcoal[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB onboard flash, embedded Linux[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[1] | Not documented |
| Total rated power draw | 600 W output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB 2.0 x2; live camera[1] | USB connection and mini-SD card[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live camera fitted; resolution not published[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[1] | 1.75 mm filament; no per-material list published on the listing[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor