3D Printing InfoPrinter comparison
Raise3D Pro3 vs Sovol SV06 Plus ACE
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Raise3D Pro3 comparisonsMore Sovol SV06 Plus ACE comparisons
| Property | Raise3D Pro3IDEX | Sovol SV06 Plus ACEBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Raise3D | Sovol |
| Class | IDEX | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Raise3D Pro3 3D Printer[1][2] | Sovol SV06 Plus ACE 3D Printer[3][4] |
| Street price (USD; dated snapshot per entry) | $2,999.00 on Raise3D's own store, available, checked Aug 2026[2] | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A crowded family with materially different prices: Pro3 $2,999, Pro3 Hyper Speed Package $4,999, Pro3 HS $4,599, Pro3 Plus HS $6,099. Build volume also changes with head count: 300 x 300 x 300 mm single-head, 255 x 300 x 300 mm dual-head. Raise3D's smaller E-series (E2 $1,999, E2CF $2,499, E3 $2,499) and the resin DF2 line are separate machines entirely[2][5][1] | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[3][4][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 300 mm with one extruder; 255 x 300 x 300 mm with both[1] | 300 x 300 x 350 mm advertised[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 620 x 626 x 760 mm[1] | 510 x 575 x 710 mm including screen and filament holder[3] |
| Net weight (kg) | 52.5 kg net[1] | Not documented |
| Frame construction & material | Fully assembled enclosed professional chassis[1] | Open i3-style frame; Sovol publishes no frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a HEPA and activated-charcoal filter[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Dual-head with an electronic lifting system[1] | Cartesian i3 bedslinger[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 500 mm/s maximum (manufacturer claim)[3] |
| Max travel speed | Print-head travel speed 30-150 mm/s (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 15,000 mm/s2 maximum (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Dual print heads, 1.75 mm filament[1] | Planetary double-gear direct drive, 1:7.5 reduction[3] |
| Gear ratio & drive gear material | Not documented | 1:7.5[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 300 °C maximum nozzle temperature[1] | <=300 °C claimed[3] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.2, 0.6, 0.8 and 1.0 mm available[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum build-plate temperature, silicone heater[1] | 100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | Flexible steel plate with BuildTak[1] | Double-sided textured PEI plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Mesh levelling with flatness detection[1] | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor fitted; type and location not published[3] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | HEPA filter with activated charcoal[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Motion controller Atmel ARM Cortex-M4 at 120 MHz with FPU; logic controller NXP ARM Cortex-A9 quad-core at 1 GHz[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | 1 GB RAM, 8 GB onboard flash, embedded Linux[1] | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W / 24 V, 100-240 VAC 50/60 Hz[3] |
| Input voltage (110/220 V, switch or auto) | 100-240 V AC, 50/60 Hz input; 24 V DC, 600 W output[1] | Not documented |
| Total rated power draw | 600 W output[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Embedded Linux on the logic controller; slicing is ideaMaker. Firmware base not published[1] | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | 4.3-inch capacitive touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB 2.0 x2; live camera[1] | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Live camera fitted; resolution not published[1] | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[3] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, nylon, composites and metal/wood-filled grades[1] | PLA, PETG, TPU, PVA[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Under 55 dB(A) while printing, manufacturer figure. No independent measurement; distance and method not stated[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XYZ step size 0.78125 / 0.78125 / 0.078125 micron (manufacturer specification, not an accuracy measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Raise3D Pro3 3D Printer listing matterhackers.com · 2026-08 · vendor
- Raise3D 3D-printer collection product feed (live prices) shop.raise3d.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Raise3D E2 3D Printer product page shop.raise3d.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor