3D Printing InfoPrinter comparison
QIDI X-Smart 3 vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Smart 3 comparisonsMore Sovol SV06 Plus comparisons
| Property | QIDI X-Smart 3COREXY | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | QIDI | Sovol |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Smart 3, listed in QIDI navigation as X-Smart3[1][2] | Sovol SV06 Plus[3] |
| Release date (announcement and actual shipping) | Not published by QIDI on the pages checked (Aug 2026)[1][2] | Not documented |
| Street price (USD; dated snapshot per entry) | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026[2] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Entry model of the 3-series. Unlike the X-Plus 3 and X-Max 3 it has no heated chamber, a 300 °C rather than 350 °C hotend, a brass rather than copper-alloy/hardened-steel nozzle head, and no Ethernet. It shares the Cortex-A53 board with them, so control-board specs must not be read as shared print specs[1][4][5] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[3][6] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[7][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 175 x 180 x 170 mm advertised[1][2] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 370 x 362 x 397 mm[1] | Not documented |
| Net weight (kg) | 10.5 kg[1] | Not documented |
| Frame construction & material | QIDI publishes no frame-material breakdown for this model[1] | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[3] |
| Enclosure: open / enclosed; panel material; door/lid | No heated chamber. 3DJake's table records "Heated chamber: No"; QIDI does not describe an enclosure for this model[1] | Open frame, no enclosure[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[1][2] | Cartesian i3 bedslinger[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | <=500 mm/s (manufacturer claim)[1][2] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[2] | Not documented |
| Max volumetric flow claimed (mm³/s) | 30 mm3/s extruder flow (manufacturer claim)[1][2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single, 1.75 mm filament[1][2] | Direct-drive extruder, single[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Brass nozzle head. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1][2] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=300 °C claimed[1][2] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Brass[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[1][2] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic RF plate[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | 16-point automatic bed levelling per QIDI's US page; probe technology not named[2] | Not documented |
| Mesh grid size (probe point count — firmware evidence) | 16 points (QIDI's US page). Not verified against firmware[2] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[1] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[1] | Not documented |
| Total rated power draw | 350 W rated[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[2] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi and USB. No Ethernet listed for this model[1][2] | USB connection and mini-SD card[3] |
| Materials Support | ||
| Officially supported filament list | Not documented | 1.75 mm filament; no per-material list published on the listing[3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage (QIDI standard store terms)[8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Smart 3 official US page qidiusa.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor