3D Printing InfoPrinter comparison
QIDI X-Max 3 vs Voron Trident
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI X-Max 3 comparisonsMore Voron Trident comparisons
| Property | QIDI X-Max 3COREXY | Voron TridentCOREXY |
|---|---|---|
| Identity | ||
| Brand | QIDI | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI X-Max 3, listed by QIDI as "Qidi Tech X-Max 3 3D Printer" and in navigation as X-Max3[1][2] | Voron Trident, current revision R2. Sold as "Voron Trident R2 3D Printer Kit by LDO"[3] |
| Release date (announcement and actual shipping) | Not published by QIDI; the product page carries a discontinuation notice rather than a launch date (checked Aug 2026)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | $899.00 (from a $999.00 sale reference) on us.qidi3d.com but marked Sold Out and discontinued, checked Aug 2026. 3D Printers Online Store lists $1,099 USD, also out of stock[1][4] | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected[3][5] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same-generation siblings X-Plus 3 (280x280x270, 500 mm/s, 800 W) and X-Smart 3 (175x180x170, no chamber heating, 300 °C, 350 W). All three share the Cortex-A53 1.5 GHz / 1 GB DDR3 / 8 GB eMMC control board, so shared-board specs are not evidence of shared print specs. Replaced by the Max4[2][6][7][8] | Two size variants on the LDO kit: Rev D 250 mm and Rev D+ 300 mm. Distinguished from the Voron 2.4 by the Z system: Trident has a fixed gantry with three Z motors lifting the bed, while the 2.4 lifts the gantry on four belted Z motors. Colour options black, space grey, blue[3][9] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI directs buyers to the Max4[1] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 325 x 325 x 315 mm advertised[1][2][4] | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 553 x 553 x 601 mm[2][4] | Not documented |
| Net weight (kg) | 30.2 kg net[2][4] | Not documented |
| Frame construction & material | Enclosed CoreXY chassis, fully assembled from the factory. QIDI does not publish a frame-material breakdown[2] | Aluminium-extrusion CoreXY frame, self-assembly[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, with a chamber circulation blower and activated-carbon air filter[2] | Not documented |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C maximum, independent chamber heating (manufacturer claim)[1][2] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[2] | CoreXY with a fixed gantry; three independent Z stepper motors raise the bed and perform bed levelling[3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Linear optical axis (polished steel rod) of high-strength steel[2] | Not documented |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z axis[2] | Three independent Z stepper motors under the bed[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | <=600 mm/s (manufacturer claim)[1][2][4] | Not documented |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 (manufacturer claim)[1] | Not documented |
| Max volumetric flow claimed (mm³/s) | 35 mm3/s extruder flow (manufacturer claim)[2] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | High-flow direct-drive extruder; QIDI states a 9.5:1 gear ratio for this model[1][2] | Bondtech Integrated Drive Gear Assembly (IGDA) with a Clockwork 2 motor[3] |
| Gear ratio & drive gear material | 9.5:1[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Ceramic heating core. Two interchangeable nozzle-head sets shipped: copper alloy for standard materials, hardened steel for abrasives. 0.4 mm stock, 0.2/0.6/0.8 mm optional[1][2] | E3D Revo High Flow with a 60 W heater[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed[1][2][4] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater in the LDO kit)[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed[2][4] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Double-sided flexible magnetic plate (QIDI's "HF" plate)[1][2] | LDO bed heater with a pre-installed magnet sheet and edge-to-edge heating[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling via Klipper adaptive meshing; probe technology not named by QIDI[1] | Omron inductive probe supplied; Klicky-mod parts also included in the kit[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament detection fitted; type and location not published[2] | Not documented |
| Cooling & Air Handling | ||
| Auxiliary part-cooling fan? | Additional (auxiliary) cooling fan fitted[2] | Not documented |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Chamber circulation blower with activated-carbon air filter[2] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Leviathan control board; Nitehawk SB USB toolhead board with an integrated accelerometer[3] |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[1][2] | Not documented |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[2] | Not documented |
| Total rated power draw | 900 W rated[2][4] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper with the Fluidd web console. Fork and version not published[1] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[2] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi (QIDI states 150M 2.4G), Ethernet, USB flash drive[2] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED chamber lighting included[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit[3] |
| Materials Support | ||
| Officially supported filament list | ABS, PLA, PETG, TPU, nylon, carbon fibre, PC[4] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Qidi Tech X-Max 3 FDM 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor