3D Printing InfoPrinter comparison
QIDI Q1 Pro vs VzBoT AWD 330
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Q1 Pro comparisonsMore VzBoT AWD 330 comparisons
| Property | QIDI Q1 ProCOREXY | VzBoT AWD 330COREXY |
|---|---|---|
| Identity | ||
| Brand | QIDI | VzBoT |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[1] | VzBoT AWD 330, also written Vz330. Sold as "DIY VzBoT AWD 330 VZ330 3D Printer Kit" by Mellow[2] |
| Release date (announcement and actual shipping) | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[1][3] | Not documented |
| Street price (USD; dated snapshot per entry) | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[1][3] | $1,360.00 at Mellow, available and shipping from China, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[1][3] | Ordered by colour (black or silver) and mains voltage (110 V or 220 V). Mellow describes the kit as a test version that still requires the buyer to print some components, and the 5-inch DSI screen requires a host computer that supports DSI — neither is included[2] |
| Market position: superseded? successor announced? | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[1][3] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[1][4] | 330 x 330 x 400 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 477 x 467 x 489 mm machine dimensions (QIDI)[1][4] | 530 x 500 x 720 mm body dimensions[2] |
| Net weight (kg) | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[1][4] | 31 kg net, 36 kg gross[2] |
| Frame construction & material | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[1] | CNC-machined all-metal frame with carbon-rod components[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[1][4] | Not documented |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[1][4] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[4] | CoreXY in an AWD (all-wheel drive) arrangement — two motors on X and two on Y, four in total for the XY plane, each on its own external driver[2] |
| X-axis guide type (rods / linear rails / V-wheels; size) | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[4] | LDO 9 mm rail on X; LDO 12 mm dual rails on Y; 10 mm optical shafts on Z[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Independent dual Z lead-screw motors[4] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Four external TMC5160 drivers for the LDO XY motors[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[1][4] | Not documented |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[1][4] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder with hardened steel gears[1][4] | Lightweight all-metal direct drive with a twill drive wheel[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[1][4] | VZ High Speed hotend[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=350 °C claimed. No firmware max_temp verified for this model[1][4] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | <=120 °C claimed. No firmware limit verified for this model[1][4] | 120 °C maximum bed temperature (manufacturer claim)[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 750 W silicone bed heater on an 8 mm aluminium plate[2] |
| Bed surface (material, texture, coating), single/double-sided | Double-sided textured PEI plate on an aluminium substrate bed[1][4] | 8 mm aluminium plate with a magnetic spring-steel PEI-coated sheet[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[4] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[4] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit mainboard, quoted by Mellow at 550 Hz. Exact board model not named on the listing[2] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[4] | Not documented |
| Total rated power draw | 350 W plus 300 W for chamber heating (rated)[1][4] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[1] | Klipper or RepRapFirmware[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 4.3-inch touchscreen, 272 x 480[1][4] | 5-inch DSI display; requires a compatible host computer, which is not included[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[1][4] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in camera, up to 1080p, timelapse supported. Framerate not published[1][4] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Ships fully assembled[1] | Self-assembly kit; some parts must be printed by the buyer[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed as a feature; mechanism not published[4] | Not documented |
| Materials Support | ||
| Officially supported filament list | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- VzBoT AWD 330 kit (Mellow) 3dmellow.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor