3D Printing InfoPrinter comparison
QIDI Plus4 vs Sovol SV07 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore QIDI Plus4 comparisonsMore Sovol SV07 Plus comparisons
| Property | QIDI Plus4COREXY | Sovol SV07 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | QIDI | Sovol |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | QIDI Plus4, sold as "Plus4 3D Printer". QIDI's own wiki files it under X-Plus4[1][2] | Sovol SV07 Plus[3][4] |
| Release date (announcement and actual shipping) | Announced September 2024; QIDI ran launch promotional pricing in the week of 20-27 September 2024 (secondary reporting, not a QIDI press release)[5] | Not documented |
| Street price (USD; dated snapshot per entry) | $649.00 on us.qidi3d.com for the Plus4 + 1 filament variant against a $799.00 compare-at price; $699.00 on qidi3d.com against $799.00. Checked Aug 2026[1][2] | $199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two purchasable variants: Plus4 + Filament x1 at $649 and Plus4 Combo + Filament x1 at $799 (Combo adds the QIDI Box multi-material unit). Distinct from the older X-Plus 3 (280x280x270, 350 °C) and from the newer Plus5 (320x320x300)[2][1] | Large-format version of the SV07. Distinguishers: 300x300x350 mm vs 220x220x250, 600 W MeanWell vs 350 W, 25-point levelling, and USB Type-C added. Both are quoted at 500 mm/s and 300 °C. Note Sovol's own comparison table gives 300x300x350 while some listings write 300x300x340[4][3] |
| Market position: superseded? successor announced? | Superseded at the top of the large-format line by the Plus5, launched 5 August 2026 with 18% more build volume; Plus4 still listed and in stock Aug 2026[6][7] | Delisted by Sovol; not present in the current 3D-printer collection[8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 305 x 305 x 280 mm advertised. No independently measured usable envelope found[1][5] | 300 x 300 x 350 mm advertised[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 505 x 487 x 550 mm[5] | 632 x 532 x 735 mm[3] |
| Net weight (kg) | 32 kg gross (3DJake). QIDI does not publish a net weight on the product page[5] | 14 kg[3] |
| Frame construction & material | Enclosed CoreXY chassis with double-layer chamber insulation; QIDI does not publish a frame material breakdown[1] | Open frame, assembly kit[4] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed, double-layer insulated chamber with second-generation active heating to 65 °C[1][5] | Open frame, no enclosure[4] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 65 °C, actively heated by a 400 W heater which QIDI says reaches setpoint in about 8 minutes (manufacturer claim)[1][5] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY[5] | Cartesian i3 bedslinger[4] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual independent Z motors on 10 mm linear shafts and screws[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s (manufacturer claim, tool-head maximum)[5] | Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range[4][3] |
| Max acceleration (claimed, mm/s²) | <=20,000 mm/s2 (manufacturer claim)[5] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive with hardened steel dual gears, 1.75 mm filament[1][5] | Dual-gear direct drive with planetary gearbox[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Second-generation 80 W bimetal hotend with a multi-metal composite hardened-tip nozzle; 0.4 mm standard, 0.2/0.5/0.8 mm optional[1][5] | All-metal hotend to 300 °C, 0.4 mm nozzle[4][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | <=370 °C claimed. No firmware max_temp verified for this model[1][5] | <=300 °C claimed[4][3] |
| Heater cartridge power (W) | 80 W hotend heater (manufacturer figure)[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Conflicting manufacturer figures: QIDI's own Plus4 page states a 100 °C bed temperature, 3DJake's spec table states <=120 °C. Not resolved; the lower vendor-published figure is used as the sortable value[1][5] | <=100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | 6 mm aluminium-substrate heated bed with a double-sided textured PEI plate[1][5] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Full-auto calibration; QIDI markets "hands-free automatic" levelling and does not name the probe technology on the product page[1][5] | 25-point automatic levelling; probe technology not stated[4] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[4] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out sensor, plus a filament cutter and filament tangle detection (tangle mechanism not described)[5] | Not documented |
| Multi-material/multi-color capability or official upgrade path | QIDI Box multi-material unit supported; sold bundled as the Plus4 Combo[1][2] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Auxiliary part-cooling fan plus a chamber circulation fan; fan sizes and duct design not published[5] | Enhanced triple cooling (Sovol's wording; no fan detail published)[4] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | Not documented | 600 W MeanWell, 24 V, 115/230 V AC input[4][3] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 50/60 Hz[5] | Not documented |
| Total rated power draw | 450 W plus 400 W for chamber heating (rated)[5] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper v0.12, described by QIDI as open source. Fork details and current release not published on the product page[1] | Klipper[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touchscreen, 800 x 480[1][5] | 5-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi 2.4 GHz, Ethernet, USB[1][5] | Wi-Fi, USB and USB Type-C[4][3] |
| Cloud service & phone app; LAN-only mode possible? | Mobile and computer control, remote cloud or LAN-only operation[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Built-in low-frame-rate camera, up to 1080p, timelapse supported[1][5] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | QIDI claims about 10 minutes from unbox to printing[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery listed; mechanism not published[5] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, ASA, PETG, TPU, PA, PC, PA-CF/GF, PET-CF/GF, PPA-CF/GF, PPS-CF and other CF/GF-filled polymers[1][5] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][4] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1-year coverage, 14-day no-reason return, 30-day price protection[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- QIDI Plus4 product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Plus4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- QIDI Tech Plus4 technical data table 3djake.com · 2026-08 · vendor
- QIDI Plus5 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Plus5 launch write-up 3dprintbeginner.com · 2026-08 · review
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor