3D Printing InfoPrinter comparison
Prusa CORE One L+ vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Prusa CORE One L+ comparisonsMore Voron 0.2 comparisons
| Property | Prusa CORE One L+COREXY | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | Prusa Research | Voron Design |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Prusa CORE One L+[1] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[2][3] |
| Release date (announcement and actual shipping) | The CORE One L+ refresh was announced on 13 August 2026 and went on sale immediately, with the first assembled units shipping at once; it adds GT1.5 belts and an integrated nozzle wiper to the CORE One L[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $1,850.93 on prusa3d.com, Aug 2026; $1,925.00 with the Advanced Filtration bundle. Prusa's own comparison text on the CORE One+ page quotes "from $1,799", which does not match the live e-shop price[5][6] | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the CORE One+ (Gen 2): 300 x 300 x 330 mm against 250 x 220 x 270 mm, 60 C chamber against 55 C, 21.9 kg against 22.5 kg (the L is the lighter of the two despite being larger). A CORE One L to CORE One L+ upgrade kit exists, so "CORE One L" and "CORE One L+" are different revisions. A Critical Infrastructure Edition is also listed[1][6][5] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 330 mm, which Prusa states as 29.7 litres[1] | 120 x 120 x 120 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 469 x 521 x 635 mm[1] | Not documented |
| Net weight (kg) | 21.9 kg (48.3 lb)[1] | Not documented |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a chamber door-open sensor and an active convection heated chamber up to 60 C; advanced filtration is an optional add-on[1] | Enclosed by acrylic panels in the LDO kit[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active convection chamber heating, maximum 60 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - stated in Prusa's CORE One+ comparison table[6] | CoreXY with the build plate moving in Z[2][3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic drivers on the custom xBuddy mainboard (Prusa's CORE One L+ specification says "custom 32-bit xBuddy mainboard with STM32 processor & Trinamic drivers"; it does not give the driver part number)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Input Shaper and Phase Stepping with an integrated accelerometer[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Nextruder direct drive with a 10:1 planetary gear system; all-metal hotend with an aluminium heatsink and a tool-free quick-swap nozzle system[1] | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[2] |
| Gear ratio & drive gear material | 10:1 planetary gearbox[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Tool-free quick-swap nozzle system; Prusa brass high-flow CHT 0.4 mm pre-mounted plus an abrasive-resistant 0.4 mm nozzle in the box[1] | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 C claimed max nozzle temperature. The optional HT hotend that raises this to 400 C was announced for September 2026 availability, so it is not a shipping specification as of Aug 2026[1][4] | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | 110 °C (Formbot kit listing)[3] |
| Bed surface (material, texture, coating), single/double-sided | Magnetic heatbed with removable dual-sided PEI spring-steel sheets; a satin powder-coated sheet is supplied[1] | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | High-precision load-cell sensor - fully automatic first-layer calibration and mesh bed levelling restricted to the print area[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Two filament sensors, plus a chamber door-open sensor and five Semitec thermistors[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Custom 32-bit xBuddy mainboard with an STM32 processor[1] | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[2][3] |
| Total rated power draw | Standby 16 W, preheating about 630 W, average printing about 90 W on PLA and about 215 W on ASA (manufacturer figures)[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[7][8] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 65k-colour touch screen (CORE One family)[6] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | On-device touch UI with Prusa Connect and Prusa mobile app remote control[6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet, NFC receiver and Wi-Fi through a physically removable module, which Prusa offers for high-security offline installations[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and with Advanced Filtration also ABS, ASA, HIPS and PA[1] | Not documented |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[9][7] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[10][8] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Prusa CORE One L+ product page (CORE One L+ Technical Specifications) prusa3d.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc