3D Printing InfoPrinter comparison
Prusa CORE One L+ vs UltiMaker S8
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Prusa CORE One L+ comparisonsMore UltiMaker S8 comparisons
| Property | Prusa CORE One L+COREXY | UltiMaker S8INDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | Prusa Research | UltiMaker |
| Class | COREXY | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Prusa CORE One L+[1] | UltiMaker S8 3D Printer[2][3] |
| Release date (announcement and actual shipping) | The CORE One L+ refresh was announced on 13 August 2026 and went on sale immediately, with the first assembled units shipping at once; it adds GT1.5 belts and an integrated nozzle wiper to the CORE One L[4] | Launched March 2025; the technical-specification and pricing announcement is dated 14 March 2025[3] |
| Street price (USD; dated snapshot per entry) | $1,850.93 on prusa3d.com, Aug 2026; $1,925.00 with the Advanced Filtration bundle. Prusa's own comparison text on the CORE One+ page quotes "from $1,799", which does not match the live e-shop price[5][6] | Starting at $8,999 at MatterHackers, in stock, checked Aug 2026. The launch announcement quoted approximately $9,000[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the CORE One+ (Gen 2): 300 x 300 x 330 mm against 250 x 220 x 270 mm, 60 C chamber against 55 C, 21.9 kg against 22.5 kg (the L is the lighter of the two despite being larger). A CORE One L to CORE One L+ upgrade kit exists, so "CORE One L" and "CORE One L+" are different revisions. A Critical Infrastructure Edition is also listed[1][6][5] | Sold as printer-only or as a Pro Bundle. The bundle is not a trim level but a different machine footprint and weight: 495 x 500 x 1210.5 mm and 47.7 kg with the 6-spool Material Station, versus 495 x 585 x 800.5 mm and 30 kg for the printer alone. Print cores AA+ 0.40 x2 are included; BB, CC+ and DD 0.40 are separate purchases[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 330 mm, which Prusa states as 29.7 litres[1] | 330 x 240 x 300 mm[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 469 x 521 x 635 mm[1] | 495 x 585 x 800.5 mm printer only; 495 x 500 x 1210.5 mm as the Pro Bundle[2][3] |
| Net weight (kg) | 21.9 kg (48.3 lb)[1] | 30 kg printer only; 47.7 kg as the Pro Bundle[2][3] |
| Frame construction & material | Not documented | Fully assembled, made in Europe[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a chamber door-open sensor and an active convection heated chamber up to 60 C; advanced filtration is an optional add-on[1] | Enclosed, with an Air Manager UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active convection chamber heating, maximum 60 C (manufacturer figure)[1] | Build-volume temperature under 50 °C with open-loop control (manufacturer figure)[2][3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - stated in Prusa's CORE One+ comparison table[6] | Dual-extrusion print head with auto nozzle-lifting, flood detection and inductive probing. UltiMaker's Cheetah motion planner uses third-order continuous motion with corner blending[2][3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic drivers on the custom xBuddy mainboard (Prusa's CORE One L+ specification says "custom 32-bit xBuddy mainboard with STM32 processor & Trinamic drivers"; it does not give the driver part number)[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | Up to 500 mm/s in XY (manufacturer claim)[2][3] |
| Max acceleration (claimed, mm/s²) | Not documented | Up to 50,000 mm/s2 (manufacturer claim)[2][3] |
| Jerk / square-corner-velocity setting (exact value) | Not documented | Jerk up to 100,000,000 mm/s3 (manufacturer claim)[2][3] |
| Max volumetric flow claimed (mm³/s) | Not documented | Up to 35 mm3/s extrusion flow (manufacturer claim)[2][3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Input Shaper and Phase Stepping with an integrated accelerometer[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Nextruder direct drive with a 10:1 planetary gear system; all-metal hotend with an aluminium heatsink and a tool-free quick-swap nozzle system[1] | Dual gripper feeder with tension adjustment, release function and filament feed-rate control[2][3] |
| Gear ratio & drive gear material | 10:1 planetary gearbox[1] | Not documented |
| Filament diameter | Not documented | 2.85 mm[2][3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Tool-free quick-swap nozzle system; Prusa brass high-flow CHT 0.4 mm pre-mounted plus an abrasive-resistant 0.4 mm nozzle in the box[1] | Swappable print cores; AA+ 0.40 x2 included, BB 0.40 / CC+ 0.40 / DD 0.40 sold separately[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 C claimed max nozzle temperature. The optional HT hotend that raises this to 400 C was announced for September 2026 availability, so it is not a shipping specification as of Aug 2026[1][4] | Up to 340 °C (manufacturer claim)[2][3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | Up to 120 °C on a flexible PEI plate (manufacturer claim)[2][3] |
| Bed surface (material, texture, coating), single/double-sided | Magnetic heatbed with removable dual-sided PEI spring-steel sheets; a satin powder-coated sheet is supplied[1] | Flexible PEI plate[2][3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | High-precision load-cell sensor - fully automatic first-layer calibration and mesh bed levelling restricted to the print area[1] | Inductive probing, integrated into the print head[2][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Two filament sensors, plus a chamber door-open sensor and five Semitec thermistors[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Dual spool holder with NFC recognition on the printer; the Pro Bundle substitutes a 6-spool Material Station with NFC and a dual-geared abrasion-resistant feeder[2][3] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | Air Manager, which UltiMaker says removes up to 95% of ultrafine particles[2][3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Custom 32-bit xBuddy mainboard with an STM32 processor[1] | Not documented |
| Total rated power draw | Standby 16 W, preheating about 630 W, average printing about 90 W on PLA and about 215 W on ASA (manufacturer figures)[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[7][8] | Not published; print preparation is UltiMaker Cura 5.10 or newer, fleet management via UltiMaker Digital Factory[2][3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 65k-colour touch screen (CORE One family)[6] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | On-device touch UI with Prusa Connect and Prusa mobile app remote control[6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet, NFC receiver and Wi-Fi through a physically removable module, which Prusa offers for high-security offline installations[1] | Wi-Fi 2.4 and 5 GHz (802.11a/b/g/n/ac), Gigabit Ethernet, USB 2.0[2][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Full HD HDR camera[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and with Advanced Filtration also ABS, ASA, HIPS and PA[1] | UltiMaker cites 301+ compatible materials including its own PLA, PETG, ABS, CPE, CPE+, PC, TPU and PET-CF, plus third-party grades[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[9][7] | Not documented |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Under 50 dBA operating sound, manufacturer figure. No independent measurement; distance and method not stated[2][3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[10][8] | 12 months, extendable to 5 years with an UltiMakerCare plan[2][3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Dimensional accuracy +/-0.15 mm +/-0.15% of feature nominal length (manufacturer specification, not an independent measurement)[2][3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Prusa CORE One L+ product page (CORE One L+ Technical Specifications) prusa3d.com · 2026-08 · vendor
- UltiMaker S8 3D Printer listing matterhackers.com · 2026-08 · vendor
- New UltiMaker S8 high-speed 3D printer: technical specifications and pricing 3dprintingindustry.com · 2026-08 · review
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc