3D Printing InfoPrinter comparison
Prusa CORE One L+ vs Sovol SV08
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Prusa CORE One L+ comparisonsMore Sovol SV08 comparisons
| Property | Prusa CORE One L+COREXY | Sovol SV08COREXY |
|---|---|---|
| Identity | ||
| Brand | Prusa Research | Sovol |
| Class | COREXY | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Prusa CORE One L+[1] | Sovol SV08 3D Printer[2][3] |
| Release date (announcement and actual shipping) | The CORE One L+ refresh was announced on 13 August 2026 and went on sale immediately, with the first assembled units shipping at once; it adds GT1.5 belts and an integrated nozzle wiper to the CORE One L[4] | Not documented |
| Street price (USD; dated snapshot per entry) | $1,850.93 on prusa3d.com, Aug 2026; $1,925.00 with the Advanced Filtration bundle. Prusa's own comparison text on the CORE One+ page quotes "from $1,799", which does not match the live e-shop price[5][6] | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the CORE One+ (Gen 2): 300 x 300 x 330 mm against 250 x 220 x 270 mm, 60 C chamber against 55 C, 21.9 kg against 22.5 kg (the L is the lighter of the two despite being larger). A CORE One L to CORE One L+ upgrade kit exists, so "CORE One L" and "CORE One L+" are different revisions. A Critical Infrastructure Edition is also listed[1][6][5] | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[3][7][8][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 300 x 330 mm, which Prusa states as 29.7 litres[1] | 350 x 350 x 345 mm advertised[2][8] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 469 x 521 x 635 mm[1] | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[2][8] |
| Net weight (kg) | 21.9 kg (48.3 lb)[1] | 21.5 kg gross (3DJake). Sovol does not publish a net weight[8] |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with a chamber door-open sensor and an active convection heated chamber up to 60 C; advanced filtration is an optional add-on[1] | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[2][7] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Active convection chamber heating, maximum 60 C (manufacturer figure)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY - stated in Prusa's CORE One+ comparison table[6] | CoreXY[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic drivers on the custom xBuddy mainboard (Prusa's CORE One L+ specification says "custom 32-bit xBuddy mainboard with STM32 processor & Trinamic drivers"; it does not give the driver part number)[1] | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 700 mm/s maximum (manufacturer claim)[2][8] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[2][8] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=30 mm3/s (manufacturer claim)[2][8] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Input Shaper and Phase Stepping with an integrated accelerometer[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Nextruder direct drive with a 10:1 planetary gear system; all-metal hotend with an aluminium heatsink and a tool-free quick-swap nozzle system[1] | Planetary-gear direct-drive extruder[2][8] |
| Gear ratio & drive gear material | 10:1 planetary gearbox[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Tool-free quick-swap nozzle system; Prusa brass high-flow CHT 0.4 mm pre-mounted plus an abrasive-resistant 0.4 mm nozzle in the box[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 C claimed max nozzle temperature. The optional HT hotend that raises this to 400 C was announced for September 2026 availability, so it is not a shipping specification as of Aug 2026[1][4] | <=300 °C claimed[2][8] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 C max heatbed temperature[1] | <=100 °C claimed[2][8] |
| Bed surface (material, texture, coating), single/double-sided | Magnetic heatbed with removable dual-sided PEI spring-steel sheets; a satin powder-coated sheet is supplied[1] | Powder-coated PEI steel plate[2][8] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | High-precision load-cell sensor - fully automatic first-layer calibration and mesh bed levelling restricted to the print area[1] | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[2][8][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Two filament sensors, plus a chamber door-open sensor and five Semitec thermistors[1] | Filament sensor fitted, with filament-runout resume; type and location not published[2][8] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Custom 32-bit xBuddy mainboard with an STM32 processor[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][8] |
| PSU (brand, wattage, rail voltage) | Not documented | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[2][8] |
| Total rated power draw | Standby 16 W, preheating about 630 W, average printing about 90 W on PLA and about 215 W on ASA (manufacturer figures)[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[9][10] | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[2][8] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch 65k-colour touch screen (CORE One family)[6] | Not documented |
| On-device UI capabilities (model preview, per-object controls, etc.) | On-device touch UI with Prusa Connect and Prusa mobile app remote control[6] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Ethernet, NFC receiver and Wi-Fi through a physically removable module, which Prusa offers for high-security offline installations[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[2][8] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[2][8] |
| Materials Support | ||
| Officially supported filament list | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB, and with Advanced Filtration also ABS, ASA, HIPS and PA[1] | PLA, PETG, TPU, PETG-CF, ABS and others[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Open-source firmware on the xBuddy platform, which carries hardware overcurrent protection cutting heater and heatbed power above 15 A[11][9] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[12][10] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Prusa CORE One L+ product page (CORE One L+ Technical Specifications) prusa3d.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Prusa blog - Better Prints, Easier Use: Prusa XL+, CORE One L+ and CORE One+ (Gen 2), Our Big Product Update (published 13 August 2026) blog.prusa3d.com · 2026-08 · doc
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc