3D Printing InfoPrinter comparison
Positron V3.2 vs Original Prusa MINI+
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Positron V3.2 comparisonsMore Original Prusa MINI+ comparisons
| Property | Positron V3.2COREXY | Original Prusa MINI+BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Positron3D | Prusa Research |
| Class | COREXY | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LDO Positron v3.2 3D Printer Kit, revision v3.2 Rev A[1] | Original Prusa MINI+ Semi-assembled 3D Printer[2] |
| Street price (USD; dated snapshot per entry) | Not documented | $508.33 on prusa3d.com, Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The defining trait is the inverted geometry: the print head is below the bed and the machine prints upside down. Sold as a self-assembly kit; the complete printed-parts set is a separate purchase. A hard storage case is included[1] | Sold semi-assembled and, historically, as a kit; also offered in an Enclosure Bundle. Distinguish from the larger i3-family machines - the MINI+ is Bowden-fed with 2209 drivers, a 280 C nozzle ceiling and a 100 C bed, all lower than the MK3S+/MK4S. Note that Prusa's own MINI+ page carries an "Awards & Press Reviews" paragraph that is entirely about the MK3S, not the MINI+[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 180 x 180 x 165 mm[1] | 180 x 180 x 180 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 200 x 200 x 70 mm folded, 200 x 200 x 270 mm unfolded[1] | 380 x 330 x 380 mm (X x Y x Z), stated without the spool holder and external PSU - the external PSU brick needs additional desk space[2] |
| Net weight (kg) | 3 kg net; 5.5 kg with the hard case[1] | 4.5 kg without spool holder and external PSU[2] |
| Frame construction & material | Folding frame designed to fit in a filament box; supplied with a black hard case[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame[1] | Open frame; sold with an optional Enclosure bundle[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY, inverted — the machine prints upside down[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic 2209 silent stepper drivers, with sensorless homing on the X and Y axes[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum print speed (manufacturer claim)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 8,000 mm/s2 (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Bowden-style, single extrusion[1] | Bowden extruder with 3:1 gearing - the only current Prusa FFF machine that is not direct drive[2] |
| Gear ratio & drive gear material | Not documented | 3:1 extruder gearing[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | PS plated-copper nozzle, 0.4 mm[1] | Not documented |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 260 °C maximum (manufacturer claim)[1] | 280 C claimed max nozzle temperature - lower than the 290-300 C of the i3-family machines[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Plated copper[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 85 °C maximum bed temperature — the lowest in this group, and the reason the material list stops at PETG[1] | 100 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Heated removable ITO glass bed[1] | Removable magnetic steel sheets in several surface finishes; heatbed with cold-corner compensation[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | SuperPINDA inductive probe with no temperature drift, driving automatic mesh bed levelling[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | LDO Positron mainboard[1] | Custom 32-bit board of Prusa's Buddy family; the MINI/MINI+ is covered by the same Prusa-Firmware-Buddy source tree as the MK4, XL and CORE One. The exact board revision is not given on the product page[2][5] |
| PSU (brand, wattage, rail voltage) | DC 24 V, 200 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Klipper[1] | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[5][6] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 3.5-inch LCD touchscreen[1] | 2.8-inch 65k-colour graphic screen with G-code preview[2] |
| On-device UI capabilities (model preview, per-object controls, etc.) | Not documented | On-device colour UI with G-code preview; remote print management through Prusa Connect[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, USB, Ethernet[1] | USB port, RJ-45 Ethernet, optional ESP Wi-Fi module (sold separately); compatible with Prusa Connect[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Self-assembly kit, manufactured in China[1] | Semi-assembled: Prusa ships it in a small number of pre-built sections; also historically sold as a full kit[2] |
| Materials Support | ||
| Officially supported filament list | PLA and PETG only, per the manufacturer[1] | PLA, PETG, ASA, ABS, PC, CPE, PVA/BVOH, PVB, HIPS, PP, Flex, nGen, Nylon, Woodfill and other filled materials (Prusa's own list; the 100 C bed and open frame are the practical limit for ABS/ASA)[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Three thermistors and fan RPM sensors are fitted, and the firmware is open-source and auditable (Prusa-Firmware-Buddy); Prusa does not describe the thermal-runaway implementation on the product page[2][5] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[7][6] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LDO Positron v3.2 3D Printer Kit matterhackers.com · 2026-08 · vendor
- Original Prusa MINI+ Semi-assembled 3D Printer product page (Technical Parameters + Full Features List, January 2025 Edition) prusa3d.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Original Prusa i3 MK3S+ 10th Anniversary Edition product page (Technical Parameters + Full Features List) prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc