3D Printing InfoPrinter comparison
Phrozen Sonic Mighty Revo 14K vs Snapmaker J1s
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Phrozen Sonic Mighty Revo 14K comparisonsMore Snapmaker J1s comparisons
| Property | Phrozen Sonic Mighty Revo 14KRESIN | Snapmaker J1sIDEX |
|---|---|---|
| Identity | ||
| Brand | Phrozen | Snapmaker |
| Class | RESIN | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer[1][2][3] | Snapmaker J1S High Speed IDEX 3D Printer[4][5] |
| Street price (USD; dated snapshot per entry) | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted[3][2][1] | $1,399.00 at MatterHackers, listed as currently unavailable with a pre-order option quoting roughly 5 weeks, checked Aug 2026[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage[2][1][3] | The J1s differs from the original J1 by an additional part-cooling fan. Usable volume depends on the print mode: 300 x 200 x 200 mm in default and backup modes, 160 x 200 x 200 in copy mode, 150 x 200 x 200 in mirror mode[4][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 235 mm[1][3] | 300 x 200 x 200 mm in default and backup modes[4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area[3][1] | 539 x 401 x 464 mm[4] |
| Net weight (kg) | 18 kg[3] | 25 kg net[4] |
| Frame construction & material | Not documented | Aluminium-alloy frame with one-piece die casting and linear rails; Snapmaker quotes rail repeatability of +/-0.03 mm in X/Y and +/-0.02 mm in Z[5] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel[1][3] | IDEX — two independently driven extruders[4][5] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Linear rails[5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear guide rails with a ball screw[1][3] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 350 mm/s maximum (manufacturer claim)[5] |
| Max acceleration (claimed, mm/s²) | Not documented | 10,000 mm/s2 maximum (manufacturer claim)[5] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C maximum (manufacturer claim)[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 °C maximum (manufacturer claim)[4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Custom dual-sided PEI glass plate: glossy glass on one face, PEI coating on the other[4][5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling[1] | 3-point bed levelling, which Snapmaker contrasts with 9-16 point systems; assisted calibration quoted at about 10 minutes[5] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | 1 GB RAM, 8 GB eMMC; the 5-inch display runs Android[4] |
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz[3] | AC 100-240 V, 50/60 Hz, 4.4 A max input; DC 24 V, 400 W max output[4] |
| Total rated power draw | 240 W maximum system power[3] | 400 W maximum output[4] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named. File formats accepted are .ctb and .prz[1][3] | Not named by Snapmaker; the supplied slicer is Luban, with third-party software supported[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touch panel (control panel — not the masking LCD, see W1)[1][3] | 5-inch Android display, 1280 x 720[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1][3] | Wi-Fi, USB cable, USB flash drive[4] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published[1] | PLA, ABS, HIPS, PC, TPU, TPE, PETG, ASA, PP, PVA, PA, PA-GF, PA-CF[4] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Not documented | Less than 50 dBA claimed by the manufacturer. No independent measurement; distance and method not stated[4] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)[3][1] | Not documented |
| Light source | Linear projection LED module. Wavelength not published[3] | Not documented |
| Layer height range | 0.01-0.30 mm[3] | Not documented |
| Release film | nFEP film supplied. No rated life published[1][3] | Not documented |
| Resin vat & feeding | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model[1][3] | Not documented |
| Fume extraction | Plug-in air purifier supplied with the machine[1] | Not documented |
| Throughputlayers/h | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured[3][1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Phrozen Sonic Mighty Revo technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- Snapmaker J1S High Speed IDEX 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker J1s product page snapmaker.com · 2026-08 · vendor