3D Printing InfoPrinter comparison
Phrozen Sonic Mighty Revo 14K vs QIDI Max4
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Phrozen Sonic Mighty Revo 14K comparisonsMore QIDI Max4 comparisons
| Property | Phrozen Sonic Mighty Revo 14KRESIN | QIDI Max4COREXY |
|---|---|---|
| Identity | ||
| Brand | Phrozen | QIDI |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer[1][2][3] | QIDI Max4, sold as "Max4 High-Temp 3D Printer"[4][5] |
| Release date (announcement and actual shipping) | Not documented | Not published on QIDI's product page; the machine is listed as the current replacement for the discontinued X-Max 3 (checked Aug 2026)[4][6] |
| Street price (USD; dated snapshot per entry) | $680.00 on us.phrozen3d.com but unavailable — backordered, shipping when back in stock, checked Aug 2026. 3DJake also shows it sold out and delisted[3][2][1] | $1,099.00 standard on us.qidi3d.com against a $1,149.00 compare-at price, checked Aug 2026. Variants: Polar Cooler bundle $1,249.00 (was $1,348.00), Max4 Combo $1,249.00 (was $1,299.00), Combo + Polar Cooler $1,399.00[4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The Sonic Mighty family spans several resolutions at the same 10.1-inch size and very different prices: Mighty 4K $149, Mighty 8K $410, Mighty 12K $329, Mighty Revo 14K $680, Mighty 16K $720. A "Sonic Mighty" spec box is meaningless without the resolution suffix. Sources also disagree on this model's own numbers: Phrozen gives machine dimensions 353 x 345 x 517 mm and XY 16.8 x 24.8 um, while 3DJake gives 228 x 337 x 516 mm and XY 16.8 x 24 um. Phrozen's own figures are used here. 8 GB onboard storage[2][1][3] | Four variants at the US store: Standard, Polar Cooler bundle, Combo (adds QIDI Box), Combo + Polar Cooler. Direct replacement for the X-Max 3, which it differs from on every headline figure: 390x390x340 vs 325x325x315, 800 vs 600 mm/s, 370 vs 350 °C. Do not carry X-Max 3 specs across[4][6] |
| Market position: superseded? successor announced? | Not documented | Current large-format flagship as of Aug 2026; QIDI's X-Max 3 page directs buyers here[4][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 223 x 126 x 235 mm[1][3] | 390 x 390 x 340 mm advertised[4][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 353 x 345 x 517 mm per Phrozen. 3DJake publishes 228 x 337 x 516 mm, which cannot be right for a machine with a 223 mm-wide build area[3][1] | 558 x 578 x 612 mm[5] |
| Net weight (kg) | 18 kg[3] | 46.5 kg net[5] |
| Frame construction & material | Not documented | Enclosed CoreXY chassis; QIDI does not publish a frame-material breakdown[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open-frame MSLA with a UV-blocking cover[1] | Fully enclosed with a 3-in-1 air filter (G3 pre-filter + H12 HEPA + coconut-shell activated carbon)[5] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 65 °C, independent active chamber heating (manufacturer claim), with a 4-pin PWM chamber fan with RPM feedback[5] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | MSLA, single Z axis on dual linear guide rails with a ball screw, straight-lift peel[1][3] | CoreXY[5] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Dual linear guide rails with a ball screw[1][3] | 2 mm lead Z screw with an anti-backlash nut[4] |
| Stepper motors (frame size, step angle, brand if known) | Not documented | FOC closed-loop stepper motors[5] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 800 mm/s (manufacturer claim, maximum)[5] |
| Max acceleration (claimed, mm/s²) | Not documented | 30,000 mm/s2 (manufacturer claim, maximum)[5] |
| Max volumetric flow claimed (mm³/s) | Not documented | 40 mm3/s rated flow (manufacturer claim)[5] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaper listed as a feature[5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive, dual hardened-steel gears, 8.9:1 reduction[5] |
| Gear ratio & drive gear material | Not documented | 8.9:1; drive gears hardened steel[5] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Multi-metal hotend with a ceramic heater and a 0.4 mm bimetal nozzle; ceramic throat[5] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=370 °C claimed[4][5] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=120 °C claimed on a 390 x 390 mm bed QIDI markets as ultra-uniform (no thermal imaging published)[4][5] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Aluminium plate with silicone heater; double-sided magnetic PEI build plate[5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic levelling[1] | Automatic levelling; probe technology not named by QIDI[5] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor and filament tangle detection (tangle mechanism not described), plus a filament cutter[5] |
| Multi-material/multi-color capability or official upgrade path | Not documented | QIDI Box multi-colour unit supported; sold bundled as the Max4 Combo[4][5] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Toolhead, model and auxiliary fans are all 4-pin PWM with RPM feedback; mainboard and chamber fans are closed-loop, chamber fan high-power turbo[5] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Not documented | 3-in-1 filtration: G3 pre-filter, H12 HEPA, coconut-shell activated carbon[5] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz[3] | 110 V / 220-240 V AC, 50/60 Hz[5] |
| Total rated power draw | 240 W maximum system power[3] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named. File formats accepted are .ctb and .prz[1][3] | Not stated on the product page; QIDI Studio, PrusaSlicer and Orca are the supported slicers[5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch touch panel (control panel — not the masking LCD, see W1)[1][3] | 5-inch touchscreen, 480 x 800[5] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB and Wi-Fi[1][3] | Wi-Fi, LAN, USB[5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | AI camera with print-failure detection[4][5] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery listed; mechanism not published[5] |
| Materials Support | ||
| Officially supported filament list | 405 nm photopolymer resin; no closed compatibility list published[1] | PLA, ABS, ASA, PETG, TPU, PA, PC, and glass- and carbon-fibre-filled polymers[5] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage, lifetime tech guidance, 14-day no-reason return[4] |
| Resin & MSLA | ||
| Masking LCD | 10.1-inch 14K monochrome masking LCD, 13,320 x 5,120 px, XY pixel pitch 16.8 x 24.8 um per Phrozen (3DJake writes 16.8 x 24 um)[3][1] | Not documented |
| Light source | Linear projection LED module. Wavelength not published[3] | Not documented |
| Layer height range | 0.01-0.30 mm[3] | Not documented |
| Release film | nFEP film supplied. No rated life published[1][3] | Not documented |
| Resin vat & feeding | Built-in resin heater fitted; Phrozen publishes no setpoint, no vat capacity, no auto-refill and no level sensing for this model[1][3] | Not documented |
| Fume extraction | Plug-in air purifier supplied with the machine[1] | Not documented |
| Throughputlayers/h | Avg. 450 layers/h on Phrozen's own product page — the only throughput figure Phrozen publishes for this model, and it publishes no mm/h at all. 3DJake states 400 layers/h for the same machine; Phrozen's own figure is used here, as elsewhere in this entry. Manufacturer claim, not a measurement, and neither source states the layer height assumed. W4 is deliberately empty: the layer range is 0.01-0.30 mm, so any mm/h conversion would be invented rather than measured[3][1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Phrozen Sonic Mighty Revo technical data table 3djake.com · 2026-08 · vendor
- Phrozen US 3D printer collection (live prices and stock) us.phrozen3d.com · 2026-08 · vendor
- Phrozen Sonic Mighty Revo 14K 10.1" LCD 3D Printer product page us.phrozen3d.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor
- QIDI Tech Max4 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Max 3 product page (US store) us.qidi3d.com · 2026-08 · vendor