3D Printing InfoPrinter comparison
Markforged X7 vs Positron V3.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Markforged X7 comparisonsMore Positron V3.2 comparisons
| Property | Markforged X7INDUSTRIAL | Positron V3.2COREXY |
|---|---|---|
| Identity | ||
| Brand | Markforged | Positron3D |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Markforged X7, current generation listed as Gen 2[1][2] | LDO Positron v3.2 3D Printer Kit, revision v3.2 Rev A[3] |
| Release date (announcement and actual shipping) | Gen 2 dated 2022[1] | Not documented |
| Launch MSRP (USD) | Approximately $69,900 USD (Aniwaa quotes the same figure in EUR)[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Top of the X series (X3, X5, X7). Markforged's other industrial lines are different machines entirely: FX10 (CA$139,986), FX20 (CA$335,860) and Metal X Gen 2 (CA$153,986). The X7 is a composite FFF machine, not a metal printer. Pricing note: No live USD listing found. CAD Micro lists the X7 (Gen 2) at CA$90,986.00, checked Aug 2026 — Canadian dollars, not USD[2][1] | The defining trait is the inverted geometry: the print head is below the bed and the machine prints upside down. Sold as a self-assembly kit; the complete printed-parts set is a separate purchase. A hard storage case is included[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 270 x 200 mm (Aniwaa records 17.82 L)[1] | 180 x 180 x 165 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 584 x 483 x 914 mm[1] | 200 x 200 x 70 mm folded, 200 x 200 x 270 mm unfolded[3] |
| Net weight (kg) | 48 kg[1] | 3 kg net; 5.5 kg with the hard case[3] |
| Frame construction & material | Not documented | Folding frame designed to fit in a filament box; supplied with a black hard case[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed industrial cabinet[1] | Open frame[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Continuous fibre deposition combined with fused filament fabrication[1] | CoreXY, inverted — the machine prints upside down[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 250 mm/s maximum print speed (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | Not documented | 8,000 mm/s2 (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Bowden-style, single extrusion[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | PS plated-copper nozzle, 0.4 mm[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 260 °C maximum (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | Layer resolution down to 0.05 mm in Z[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Plated copper[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 85 °C maximum bed temperature — the lowest in this group, and the reason the material list stops at PETG[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Heated removable ITO glass bed[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Positron mainboard[3] |
| PSU (brand, wattage, rail voltage) | Not documented | DC 24 V, 200 W[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 3.5-inch LCD touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi, USB, Ethernet[3] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit, manufactured in China[3] |
| Materials Support | ||
| Officially supported filament list | Composites with carbon, glass and Kevlar-reinforced polymers; elastomers (TPU); thermoplastics including PLA and PA-CF. Markforged's continuous fibre strands are carbon, fibreglass or Kevlar laid inside Onyx[1] | PLA and PETG only, per the manufacturer[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged 3D printer collection (live prices, CAD) shop.cadmicro.com · 2026-08 · vendor
- LDO Positron v3.2 3D Printer Kit matterhackers.com · 2026-08 · vendor