3D Printing InfoPrinter comparison
Markforged Onyx One vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Markforged Onyx One comparisonsMore Voron 0.2 comparisons
| Property | Markforged Onyx OneINDUSTRIAL | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | Markforged | Voron Design |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Markforged Onyx One Desktop 3D Printer[1] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[2][3] |
| Street price (USD; dated snapshot per entry) | Not documented | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The defining limitation: the Onyx One prints Onyx only and has NO continuous-fibre reinforcement. The Onyx Pro adds fibreglass, the Mark Two adds the full continuous-fibre range, and the X7 is a much larger industrial machine. Onyx One specifications must never be read from Mark Two or X-series material lists[1][4][5] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 12.6 x 5.2 x 6.1 in (approximately 320 x 132 x 155 mm)[1] | 120 x 120 x 120 mm[2][3] |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed desktop cabinet[1] | Enclosed by acrylic panels in the LDO kit[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY with the build plate moving in Z[2][3] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Single extruder — plastic only, no fibre channel[1] | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C (Formbot kit listing)[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[2][3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing and print management run in Markforged's cloud-based Eiger software[1] | Klipper[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[2][3] |
| Materials Support | ||
| Officially supported filament list | Onyx only — Markforged's nylon filled with chopped carbon fibre. Markforged claims parts 1.4x stronger than ABS and heat deflection to 293 °F (145 °C)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Markforged Onyx One desktop composite 3D printer listing exbuild.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor
- Markforged Mark Two (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc