3D Printing InfoPrinter comparison
Markforged Mark Two vs Snapmaker U1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Markforged Mark Two comparisonsMore Snapmaker U1 comparisons
| Property | Markforged Mark TwoINDUSTRIAL | Snapmaker U1TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | Markforged | Snapmaker |
| Class | INDUSTRIAL | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Markforged Mark Two, current generation listed as Gen 2[1][2] | Snapmaker U1 3D Printer[3] |
| Release date (announcement and actual shipping) | Gen 2 dated 2024[1] | Not documented |
| Launch MSRP (USD) | From $20,000 (approximately EUR 20,000)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A no-WiFi Gen 2 variant is sold alongside the standard Gen 2 at the same list price; connectivity is therefore not implied by the model name. Sits between the Onyx Pro (fibreglass only) and the X7 (much larger, 330 x 270 x 200 mm). Pricing note: No live USD listing found. CAD Micro lists the Mark Two (Gen 2) at CA$22,386.00, and separately a Gen 2 no-WiFi variant at the same CA$22,386.00, checked Aug 2026 — Canadian dollars, not USD[2][4][5] | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 6.5 L (Aniwaa's figure). Exact XYZ not stated on the sources checked[1] | 270 x 270 x 270 mm[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 584 x 330 x 355 mm[1] | 584 x 499 x 730 mm[3] |
| Net weight (kg) | 16 kg[1] | 18.2 kg[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed desktop cabinet[1] | Open as sold; a top cover is an optional accessory that raises the supported material range[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Continuous fibre deposition combined with fused filament fabrication[1] | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 500 mm/s maximum toolhead speed (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 maximum (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | 32 mm3/s maximum hotend flow (manufacturer claim)[3] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaping with an accelerometer, run as a calibration routine[3] |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Not documented | Pressure advance, with automatic flow compensation calibration[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C maximum (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | Layer thickness down to 0.1 mm in Z[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Stainless steel as standard; hardened steel needed for fibre-filled grades[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 100 °C maximum (manufacturer claim)[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Flexible steel sheet with a PEI surface[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out detection, plus air-printing detection and RFID filament recognition[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[3] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Main plus auxiliary part-cooling fans[3] |
| Electronics & Power | ||
| Total rated power draw | Not documented | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 3.5-inch, 320 x 480 touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | 2 MP built-in chamber camera for live view[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[3] |
| Materials Support | ||
| Officially supported filament list | Composites with carbon, glass and Kevlar-reinforced polymers; elastomers (TPU); thermoplastics including PLA and polyamides[1] | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Markforged Mark Two (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged 3D printer collection (live prices, CAD) shop.cadmicro.com · 2026-08 · vendor
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged Onyx One desktop composite 3D printer listing exbuild.com · 2026-08 · vendor