3D Printing InfoPrinter comparison
Markforged Mark Two vs Snapmaker Artisan
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Markforged Mark Two comparisonsMore Snapmaker Artisan comparisons
| Property | Markforged Mark TwoINDUSTRIAL | Snapmaker ArtisanIDEX |
|---|---|---|
| Identity | ||
| Brand | Markforged | Snapmaker |
| Class | INDUSTRIAL | IDEX |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Markforged Mark Two, current generation listed as Gen 2[1][2] | Snapmaker Artisan 3-in-1 (3D printing, laser, CNC)[3] |
| Release date (announcement and actual shipping) | Gen 2 dated 2024[1] | Not documented |
| Launch MSRP (USD) | From $20,000 (approximately EUR 20,000)[1] | Not documented |
| Street price (USD; dated snapshot per entry) | Not documented | $2,996.00 against a $5,046.00 compare-at price on us.snapmaker.com, but marked Unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | A no-WiFi Gen 2 variant is sold alongside the standard Gen 2 at the same list price; connectivity is therefore not implied by the model name. Sits between the Onyx Pro (fibreglass only) and the X7 (much larger, 330 x 270 x 200 mm). Pricing note: No live USD listing found. CAD Micro lists the Mark Two (Gen 2) at CA$22,386.00, and separately a Gen 2 no-WiFi variant at the same CA$22,386.00, checked Aug 2026 — Canadian dollars, not USD[2][4][5] | The 3D-printing work area depends on which nozzle is used: 350 x 400 x 400 mm in dual-nozzle mode, 375 x 400 x 400 with the left nozzle only, 400 x 400 x 400 with the right nozzle only. The bed is also zoned: a 260 x 260 mm inner zone reaches 110 °C while the outer zone stops at 80 °C. A quoted "400x400x400 / 110 °C" therefore describes no single real configuration. Laser module is 10 W or 40 W[3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 6.5 L (Aniwaa's figure). Exact XYZ not stated on the sources checked[1] | 350 x 400 x 400 mm in dual-nozzle mode (400 x 400 x 400 with the right nozzle alone)[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 584 x 330 x 355 mm[1] | 580 x 620 x 634 mm bare; 665 x 943 x 705 mm with the enclosure[3] |
| Net weight (kg) | 16 kg[1] | Snapmaker publishes package weights rather than a net weight: 37.3 kg (package A) plus 25.2 kg (package B); the premium bundle splits as 37.3 + 19.5 + 1.91 kg[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed desktop cabinet[1] | Enclosure available; the enclosed footprint is quoted separately at 665 x 943 x 705 mm[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Continuous fibre deposition combined with fused filament fabrication[1] | IDEX — two independently driven print heads[3] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Z-axis lead 8 mm; X and Y leads 40 mm[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 180 mm/s maximum recommended print speed (manufacturer figure — a recommendation, not a peak claim)[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C maximum (manufacturer claim)[3] |
| Stock nozzle size & sizes included in box | Layer thickness down to 0.1 mm in Z[1] | 0.4 mm standard; 0.2, 0.6 and 0.8 mm optional[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Brass standard, hardened steel optional[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C in the 260 x 260 mm inner zone; 80 °C in the outer zone[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided textured PEI sheet[3] |
| Electronics & Power | ||
| Total rated power draw | Not documented | Integrated controller rated 300 W + 450 W[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Not named by Snapmaker; the controller runs Android and the supplied software is Snapmaker Luban, with third-party software supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 7-inch touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi, USB cable, USB flash drive[3] |
| Materials Support | ||
| Officially supported filament list | Composites with carbon, glass and Kevlar-reinforced polymers; elastomers (TPU); thermoplastics including PLA and polyamides[1] | PLA, ABS, ASA, PETG, TPU (>=90 Shore A), breakaway support, PVA, HIPS, nylon, and carbon/glass-fibre reinforced variants[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Repeatability +/-0.05 mm (manufacturer specification, not an independent measurement)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Markforged Mark Two (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged 3D printer collection (live prices, CAD) shop.cadmicro.com · 2026-08 · vendor
- Snapmaker Artisan 3-in-1 product page us.snapmaker.com · 2026-08 · vendor
- Markforged X7 (Gen 2) specification page aniwaa.com · 2026-08 · doc
- Markforged Onyx One desktop composite 3D printer listing exbuild.com · 2026-08 · vendor