3D Printing InfoPrinter comparison
LulzBot TAZ Pro vs QIDI X-Smart 3
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore LulzBot TAZ Pro comparisonsMore QIDI X-Smart 3 comparisons
| Property | LulzBot TAZ ProBEDSLINGER | QIDI X-Smart 3COREXY |
|---|---|---|
| Identity | ||
| Brand | LulzBot | QIDI |
| Class | BEDSLINGER | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)[1] | QIDI X-Smart 3, listed in QIDI navigation as X-Smart3[2][3] |
| Release date (announcement and actual shipping) | Not documented | Not published by QIDI on the pages checked (Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026[1] | $399 on QIDI's official US page, which routes purchases to its AliExpress and Amazon stores; checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets[1][4] | Entry model of the 3-series. Unlike the X-Plus 3 and X-Max 3 it has no heated chamber, a 300 °C rather than 350 °C hotend, a brass rather than copper-alloy/hardened-steel nozzle head, and no Ethernet. It shares the Cortex-A53 board with them, so control-board specs must not be read as shared print specs[2][5][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 285 x 285 x 285 mm[1] | 175 x 180 x 170 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 370 x 362 x 397 mm[2] |
| Net weight (kg) | Not documented | 10.5 kg[2] |
| Frame construction & material | Open frame; movement on GT2 belts with Igus SST rods and polymer bushings[1] | QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | No heated chamber. 3DJake's table records "Heated chamber: No"; QIDI does not describe an enclosure for this model[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY[2][3] |
| Belts (type, width, e.g. Gates?) | GT2 belt drive[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | <=500 mm/s (manufacturer claim)[2][3] |
| Max travel speed | 300 mm/s maximum travel speed (manufacturer figure)[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 (manufacturer claim)[3] |
| Max volumetric flow claimed (mm³/s) | Not documented | 30 mm3/s extruder flow (manufacturer claim)[2][3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Pro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing[1] | Direct-drive extruder, single, 1.75 mm filament[2][3] |
| Filament diameter | 2.85 mm standard, 1.75 mm optional[1] | Not documented |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Brass nozzle head. 0.4 mm stock, 0.2/0.6/0.8 mm optional[2][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 °C maximum hot end temperature[1] | <=300 °C claimed[2][3] |
| Stock nozzle size & sizes included in box | 0.5 mm hardened steel[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel[1] | Brass[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C maximum bed temperature[1] | <=120 °C claimed[2][3] |
| Bed heater type (DC/AC mains) & wattage | 360 W, 24 V silicone bed heater[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided borosilicate glass with PEI film[1] | Double-sided flexible magnetic RF plate[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation[1] | 16-point automatic bed levelling per QIDI's US page; probe technology not named[3] |
| Mesh grid size (probe point count — firmware evidence) | 4-point mesh[1] | 16 points (QIDI's US page). Not verified against firmware[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor with both runout and stripping detection[1] | Filament detection fitted; type and location not published[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[1] | Not documented |
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Cortex-A53 64-bit at 1.5 GHz, 1 GB DDR3, 8 GB eMMC[2] |
| PSU (brand, wattage, rail voltage) | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[1] | Not documented |
| Input voltage (110/220 V, switch or auto) | Not documented | 100-240 VAC, 50/60 Hz[2] |
| Total rated power draw | Not documented | 350 W rated[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin[1] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch full-colour resistive touchscreen[1] | 4.3-inch touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB serial; a 16 GB flash drive is included for standalone printing[1] | Wi-Fi and USB. No Ethernet listed for this model[2][3] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[1] | Not documented |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year standard, with extended options. Made in the USA[1] | 1-year coverage (QIDI standard store terms)[7] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- QIDI Tech X-Smart 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI X-Smart 3 official US page qidiusa.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- QIDI Tech X-Plus 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech X-Max 3 technical data table 3djake.com · 2026-08 · vendor
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor