3D Printing InfoPrinter comparison
LulzBot TAZ Pro vs Prusa CORE One+ (Gen 2) INDX
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore LulzBot TAZ Pro comparisonsMore Prusa CORE One+ (Gen 2) INDX comparisons
| Property | LulzBot TAZ ProBEDSLINGER | Prusa CORE One+ (Gen 2) INDXTOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | LulzBot | Prusa Research |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)[1] | Prusa CORE One+ (Gen 2) INDX, listed as "INDX 4-Tool" and "INDX 8-Tool" variants and as an "INDX 8-Tool Assembly kit"[2][3] |
| Release date (announcement and actual shipping) | Not documented | Announced as shipping on 20 August 2026 ("INDX, Shipping Has Started, Complete Printers Open for Orders"). Prusa's own front page in Aug 2026 announces "Prusa CORE One+ (Gen 2) INDX, Shipping Has Started, Complete Printers Open for Orders", with the assembled 8-tool machine quoted as shipping from 15 October and the kit from 29 October[4][2] |
| Street price (USD; dated snapshot per entry) | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026[1] | $1,850.93 for the INDX 4-Tool and $2,082.41 for the INDX 8-Tool on prusa3d.com, Aug 2026; the 8-Tool assembly kit is $1,804.63. Camera and filtration bundles run to $2,152.78[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets[1][5] | INDX is a multi-tool option on the CORE One+ (Gen 2) product page rather than a separate printer, sold in 4-tool and 8-tool configurations, plus a CORE One/+ INDX conversion kit for existing machines. All of the body, hotend, bed and electronics figures below come from that shared CORE One+ (Gen 2) page and were not published separately for the INDX machine, so treat them as platform figures. Prusa also sells the unrelated MMU3, which multiplexes five filaments through one nozzle[3][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 285 x 285 x 285 mm[1] | 250 x 220 x 270 mm - the CORE One+ (Gen 2) figure from the shared product page; Prusa does not publish a separate INDX build volume[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 415 x 444 x 555 mm - shared CORE One+ (Gen 2) figure[3] |
| Frame construction & material | Open frame; movement on GT2 belts with Igus SST rods and polymer bushings[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Fully enclosed with active chamber heating up to 55 C (shared CORE One+ platform)[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | CoreXY with a multi-tool head-changing system (INDX); Prusa's comparison table gives CoreXY for the CORE One family[3] |
| Belts (type, width, e.g. Gates?) | GT2 belt drive[1] | Not documented |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130[1] | Not documented |
| Speed & Acceleration | ||
| Max travel speed | 300 mm/s maximum travel speed (manufacturer figure)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Pro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing[1] | Nextruder direct drive, 10:1 planetary gearbox (shared platform)[3] |
| Filament diameter | 2.85 mm standard, 1.75 mm optional[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 °C maximum hot end temperature[1] | 290 C claimed max nozzle temperature, 400 C with the optional HT hotend (shared platform)[3] |
| Stock nozzle size & sizes included in box | 0.5 mm hardened steel[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 110 °C maximum bed temperature[1] | 120 C max heatbed temperature (shared platform)[3] |
| Bed heater type (DC/AC mains) & wattage | 360 W, 24 V silicone bed heater[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Dual-sided borosilicate glass with PEI film[1] | Not documented |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation[1] | Load-cell sensor, fully automatic first-layer calibration (shared platform)[3] |
| Mesh grid size (probe point count — firmware evidence) | 4-point mesh[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor with both runout and stripping detection[1] | Filament sensors fitted (two on the CORE One+ platform)[3] |
| Multi-material/multi-color capability or official upgrade path | Not documented | INDX gives up to eight filaments; the alternative MMU3 handles five through a single nozzle[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[1] | Custom 32-bit xBuddy board with STM32 (shared platform)[3] |
| PSU (brand, wattage, rail voltage) | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin[1] | Open-source Prusa Buddy firmware. The source tree (prusa3d/Prusa-Firmware-Buddy on GitHub) explicitly covers the Original Prusa MINI/MINI+, MK4, XL and CORE One and was last pushed to in August 2026. Updates are applied from a USB drive, through Prusa Connect or through the Prusa mobile app[6][7] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 5-inch full-colour resistive touchscreen[1] | 3.5-inch 65k-colour touch screen (shared platform)[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB serial; a 16 GB flash drive is included for standalone printing[1] | Ethernet and Wi-Fi, USB drive (shared platform)[3] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[1] | PLA, PETG, Flex, PVA, PC, PP, CPE, PVB; ABS, ASA, HIPS and PA as advanced materials in the heated chamber (shared platform)[3] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year standard, with extended options. Made in the USA[1] | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[8][7] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- Prusa CORE One+ (Gen 2) product page (Technical Parameters + CORE One+/MK4S/CORE One L comparison) prusa3d.com · 2026-08 · vendor
- Prusa blog - Prusa CORE One+ (Gen 2) INDX, Shipping Has Started, Complete Printers Open for Orders (published 20 August 2026) blog.prusa3d.com · 2026-08 · doc
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware-Buddy (firmware for MINI, MK4, XL and CORE One) github.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc