3D Printing InfoPrinter comparison
LulzBot TAZ Pro Long Bed vs Snapmaker U1
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore LulzBot TAZ Pro Long Bed comparisonsMore Snapmaker U1 comparisons
| Property | LulzBot TAZ Pro Long BedBEDSLINGER | Snapmaker U1TOOLCHANGER |
|---|---|---|
| Identity | ||
| Brand | LulzBot | Snapmaker |
| Class | BEDSLINGER | TOOLCHANGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | LulzBot TAZ Pro Long Bed 3D Printer[1] | Snapmaker U1 3D Printer[2] |
| Street price (USD; dated snapshot per entry) | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[1] | $849.00 against a $999.00 compare-at price on us.snapmaker.com, but the listing is marked Unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[1][3] | An optional top cover changes what the machine can print: without it PLA/PETG/TPU/PVA/PCTG; with it ABS, ASA, PA, PC and PET are added; with the top cover AND a hardened-steel nozzle, carbon- and glass-fibre grades. A stated material list for the U1 is therefore meaningless without saying which configuration it refers to[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 282 x 582 x 285 mm[1] | 270 x 270 x 270 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 584 x 499 x 730 mm[2] |
| Net weight (kg) | Not documented | 18.2 kg[2] |
| Frame construction & material | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[1] | Not documented |
| Enclosure: open / enclosed; panel material; door/lid | Open frame, no enclosure[1] | Open as sold; a top cover is an optional accessory that raises the supported material range[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Cartesian bedslinger[1] | Four independent toolheads on a changer; Snapmaker quotes a 5-second swap[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Trinamic TMC2130[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 500 mm/s maximum toolhead speed (manufacturer claim)[2] |
| Max travel speed | 150 mm/s maximum travel speed, firmware-limited[1] | Not documented |
| Max acceleration (claimed, mm/s²) | Not documented | 20,000 mm/s2 maximum (manufacturer claim)[2] |
| Max volumetric flow claimed (mm³/s) | Not documented | 32 mm3/s maximum hotend flow (manufacturer claim)[2] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Not documented | Input shaping with an accelerometer, run as a calibration routine[2] |
| Extrusion Pressure Control | ||
| Pressure advance (Klipper) / linear advance (Marlin) supported? | Not documented | Pressure advance, with automatic flow compensation calibration[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Asteroid 285 tool head[1] | Not documented |
| Filament diameter | 2.85 mm standard, 1.75 mm optional[1] | Not documented |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 290 °C maximum, firmware-limited[1] | 300 °C maximum (manufacturer claim)[2] |
| Stock nozzle size & sizes included in box | 1.2 mm GammaMaster steel[1] | Not documented |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | GammaMaster steel[1] | Stainless steel as standard; hardened steel needed for fibre-filled grades[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[1] | 100 °C maximum (manufacturer claim)[2] |
| Bed heater type (DC/AC mains) & wattage | 360 W, 24 V silicone bed heater[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Blue spring-steel magnetic flex bed system[1] | Flexible steel sheet with a PEI surface[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | BLTouch, 32-point automatic mesh calibration[1] | Mesh bed levelling. Automatic toolhead offset calibration is done by coordinate measuring[2] |
| Mesh grid size (probe point count — firmware evidence) | 32 points[1] | Not documented |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament sensor with runout and stripping detection[1] | Filament run-out detection, plus air-printing detection and RFID filament recognition[2] |
| Multi-material/multi-color capability or official upgrade path | Not documented | Four toolheads with auto-feed and a backup mode; toolhead swap error detection, build-plate presence and obstruction detection[2] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Main plus auxiliary part-cooling fans[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[1] | Not documented |
| PSU (brand, wattage, rail voltage) | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[1] | Not documented |
| Total rated power draw | Not documented | Maximum input power 1150 W at 220-240 V, 400 W at 100-120 V; maximum input current 6 A / 4 A respectively[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Marlin[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 3.5-inch, 320 x 480 touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB serial; 16 GB flash drive included for standalone printing[1] | Wi-Fi 2.4 GHz (802.11b/g/n) and USB flash drive. No Ethernet listed[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | 2 MP built-in chamber camera for live view[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | Power-loss recovery supported; mechanism not published[2] |
| Materials Support | ||
| Officially supported filament list | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[1] | Base: PLA, PETG, TPU, PVA, PCTG. With the optional top cover: adds PET, ABS, ASA, PA, PC. With top cover and a hardened-steel nozzle: adds carbon- and glass-fibre-reinforced polymers[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 1 year standard with extended options. Made in the USA[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Snapmaker U1 product page us.snapmaker.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor