3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 610 HT vs Voron Trident
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 610 HT comparisonsMore Voron Trident comparisons
| Property | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL | Voron TridentCOREXY |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Voron Design |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1] | Voron Trident, current revision R2. Sold as "Voron Trident R2 3D Printer Kit by LDO"[2] |
| Street price (USD; dated snapshot per entry) | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1] | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][4] | Two size variants on the LDO kit: Rev D 250 mm and Rev D+ 300 mm. Distinguished from the Voron 2.4 by the Z system: Trident has a fixed gantry with three Z motors lifting the bed, while the 2.4 lifts the gantry on four belted Z motors. Colour options black, space grey, blue[2][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 610 x 508 x 508 mm (24 x 20 x 20 in)[1] | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1710 x 1425 x 2350 mm including the warning lights[1] | Not documented |
| Net weight (kg) | 1450 kg[1] | Not documented |
| Frame construction & material | Servo control system on high-precision ball screws; liquid cooling plus fans[1] | Aluminium-extrusion CoreXY frame, self-assembly[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1] | Not documented |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Servo-driven ball-screw motion system; two nozzles[1] | CoreXY with a fixed gantry; three independent Z stepper motors raise the bed and perform bed levelling[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three independent Z stepper motors under the bed[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament[1] | Bondtech Integrated Drive Gear Assembly (IGDA) with a Clockwork 2 motor[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | E3D Revo High Flow with a 60 W heater[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater in the LDO kit)[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Up to 300 °C heated build plate[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Flexible build plates with a vacuum adsorption system[1] | LDO bed heater with a pre-installed magnet sheet and edge-to-edge heating[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling; probe technology not named[1] | Omron inductive probe supplied; Klicky-mod parts also included in the kit[2] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Leviathan control board; Nitehawk SB USB toolhead board with an integrated accelerometer[2] |
| Input voltage (110/220 V, switch or auto) | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1] | Not documented |
| Total rated power draw | 15 kW maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is INTAMSUITE (Windows only)[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10-inch touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED chamber lighting included[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit[2] |
| Materials Support | ||
| Officially supported filament list | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1] | Not documented |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, SGS; safety design to EN60204[1] | Not documented |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor