Printer comparison

INTAMSYS FUNMAT PRO 610 HT vs Voron 2.4

Compare hardware, build volume, printing specifications, dated prices and sources.

INTAMSYS FUNMAT PRO 610 HT guide Voron 2.4 guide

First printerSecond printer

2 selected · all documented properties

Open these two in the interactive comparison More INTAMSYS FUNMAT PRO 610 HT comparisons More Voron 2.4 comparisons

INTAMSYS FUNMAT PRO 610 HT vs Voron 2.4 — documented properties and sources
Property	INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL	Voron 2.4COREXY
Identity
Brand	INTAMSYS	Voron Design
Class	INDUSTRIAL	COREXY
Identity & Market
Manufacturer & exact marketed model name (verify the exact product identity first)	INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1]	Voron 2.4, current revision R2, kits shipping as Rev D and Rev D+. Sold as "Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO"[2][3]
Street price (USD; dated snapshot per entry)	$139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1]	$1,399.99 for the LDO Rev D+ kit at Fabreeko (300 mm and 350 mm are the same price), on pre-order with a mid-September estimate, checked Aug 2026. Fabreeko's live feed shows the base 2.4 kit listing at $1,299.99 and available. 3DJake lists an LDO 350 RevD kit but will not ship to the US[2][4][5]
Variants & sibling models — and how to tell them apart (spec-contamination risk)	The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][6]	Sizes 250, 300 and 350 mm; LDO ships Rev D and Rev D+. Colours black, space grey, blue. Do not confuse with the Trident: the 2.4 lifts the whole gantry on four belted Z motors, the Trident lifts the bed on three screws. The Rev D+ kit includes a Raspberry Pi 4B; the older 3DJake-listed RevD kit explicitly does not include a Pi[2][3][5][7]
Physical & Frame
Build volume X×Y×Z (mm) — advertised vs actually usable	610 x 508 x 508 mm (24 x 20 x 20 in)[1]	300 x 300 x 300 mm or 350 x 350 x 350 mm. Sortable value is the 350 mm kit[2][3][5]
Machine footprint (mm) & clearance needed (cable/spool overhang)	1710 x 1425 x 2350 mm including the warning lights[1]	Not documented
Net weight (kg)	1450 kg[1]	Not documented
Frame construction & material	Servo control system on high-precision ball screws; liquid cooling plus fans[1]	Blind-joint aluminium-extrusion frame with a complete panel set; stainless-steel linear rails throughout[3][5]
Enclosure: open / enclosed; panel material; door/lid	Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1]	Enclosed by the supplied panel set. A Nevermore Micro V5 internal circulation filter is included in the LDO kit[5]
Passive chamber temperature reached (if enclosed; measured values preferred)	Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1]	Not documented
Kinematics & Motion Hardware
Kinematics (bedslinger i3 / CoreXY / other)	Servo-driven ball-screw motion system; two nozzles[1]	CoreXY on linear rails, with a belted flying gantry on four Z motors[3][2]
Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?)	Not documented	LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers, ready for 48 V upgrades[2]
Speed & Acceleration
Max print speed (claimed, mm/s)	160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1]	Not documented
Extruder
Type (direct drive / bowden) & design name	Two nozzles, 1.75 mm filament[1]	Clockwork 2 with a Bondtech BMG / Integrated Drive Gear Assembly, in a Stealthburner toolhead[2][3][5]
Hotend & Nozzle
Hotend design (proprietary/standard; quick-swap mechanism?)	Not documented	E3D Revo Voron (24 V), all-metal, high-flow variant in the Rev D+ kit, with a 60 W heater; upgradeable to a Phaetus Rapido HF for $9.99[2][3][5]
Max nozzle temp claimed AND firmware max temp limit (both values)	500 °C maximum nozzle temperature (manufacturer specification)[1]	Not documented
Heater cartridge power (W)	Not documented	60 W (E3D Revo High Flow heater)[2]
Stock nozzle size & sizes included in box	0.4 mm default; 0.6 and 0.8 mm optional[1]	Not documented
Heated Bed & Surface
Max bed temp claimed AND firmware limit	Up to 300 °C heated build plate[1]	Not documented
Bed surface (material, texture, coating), single/double-sided	Flexible build plates with a vacuum adsorption system[1]	Cast 5083 aluminium plate with a magnetic base and a powder-coated PEI sheet; LDO silicone bed heater with edge-to-edge heating[3][2][5]
Leveling & Z-Offset
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)	Auto levelling; probe technology not named[1]	Omron inductive probe supplied; Klicky-mod parts included. Voron Tap is available as an add-on rather than standard[2][3]
Filament Handling & Detection
Spool holder location & max spool size; drybox compatibility	Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1]	Not documented
Electronics & Power
Mainboard model & MCU (exact chip markings if teardowns exist)	Not documented	LDO x Voron Leviathan mainboard (replacing the earlier BTT Octopus), plus a Nitehawk SB USB toolhead PCB[3][2][5]
Input voltage (110/220 V, switch or auto)	Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1]	Not documented
Total rated power draw	15 kW maximum[1]	Not documented
Firmware & Openness
Firmware base & current version (Klipper fork / Marlin fork / proprietary)	Proprietary; slicing is INTAMSUITE (Windows only)[1]	Klipper, hosted on a Raspberry Pi 4B (included in the Fabreeko Rev D+ kit, not in the older 3DJake RevD kit)[2][3][5]
Connectivity, UI & Camera
Display: size, type, touch?	10-inch touchscreen[1]	4.3-inch touchscreen included in the LDO kit[5]
WiFi (band/standard), Ethernet, USB ports, SD/flash-drive	Wi-Fi, Ethernet, USB[1]	Not documented
LED chamber/toolhead lighting	Not documented	COB LED strips included[2][5]
Calibration Routines & QoL
Assembly level & time from unbox to first print	Not documented	Self-assembly kit; some parts must be printed by the user, and the LDO kit supplies pre-cut, pre-crimped cables and a heat-set insert soldering tip[5]
Materials Support
Officially supported filament list	PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1]	Not documented
Safety
Certifications (UL/ETL/CE/FCC — verify, don't assume)	CE, FCC, SGS; safety design to EN60204[1]	Not documented
Hardware safety: fusing, strain reliefs, belt covers, pinch points	Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1]	Not documented
Independently Measured Performance
Dimensional accuracy measurements (third-party, with numbers)	Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1]	Not documented

Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.

Sources for this comparison

Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor
LDO Voron 2.4 R2 (Rev D) kit listing matterhackers.com · 2026-08 · vendor
Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
LDO Motors Voron 2.4 350 RevD kit contents 3djake.com · 2026-08 · vendor
Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor