Printer comparison

INTAMSYS FUNMAT PRO 610 HT vs Sovol SV08

Compare hardware, build volume, printing specifications, dated prices and sources.

INTAMSYS FUNMAT PRO 610 HT guide Sovol SV08 guide

First printerSecond printer

2 selected · all documented properties

Open these two in the interactive comparison More INTAMSYS FUNMAT PRO 610 HT comparisons More Sovol SV08 comparisons

INTAMSYS FUNMAT PRO 610 HT vs Sovol SV08 — documented properties and sources
Property	INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL	Sovol SV08COREXY
Identity
Brand	INTAMSYS	Sovol
Class	INDUSTRIAL	COREXY
Identity & Market
Manufacturer & exact marketed model name (verify the exact product identity first)	INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1]	Sovol SV08 3D Printer[2][3]
Street price (USD; dated snapshot per entry)	$139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1]	$549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[2][3]
Variants & sibling models — and how to tell them apart (spec-contamination risk)	The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][4]	Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[3][5][6][2]
Physical & Frame
Build volume X×Y×Z (mm) — advertised vs actually usable	610 x 508 x 508 mm (24 x 20 x 20 in)[1]	350 x 350 x 345 mm advertised[2][6]
Machine footprint (mm) & clearance needed (cable/spool overhang)	1710 x 1425 x 2350 mm including the warning lights[1]	550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[2][6]
Net weight (kg)	1450 kg[1]	21.5 kg gross (3DJake). Sovol does not publish a net weight[6]
Frame construction & material	Servo control system on high-precision ball screws; liquid cooling plus fans[1]	Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[2]
Enclosure: open / enclosed; panel material; door/lid	Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1]	Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[2][5]
Passive chamber temperature reached (if enclosed; measured values preferred)	Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1]	Not documented
Kinematics & Motion Hardware
Kinematics (bedslinger i3 / CoreXY / other)	Servo-driven ball-screw motion system; two nozzles[1]	CoreXY[2]
Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?)	Not documented	TMC2209[2]
Speed & Acceleration
Max print speed (claimed, mm/s)	160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1]	700 mm/s maximum (manufacturer claim)[2][6]
Max acceleration (claimed, mm/s²)	Not documented	40,000 mm/s2 maximum (manufacturer claim)[2][6]
Max volumetric flow claimed (mm³/s)	Not documented	<=30 mm3/s (manufacturer claim)[2][6]
Extruder
Type (direct drive / bowden) & design name	Two nozzles, 1.75 mm filament[1]	Planetary-gear direct-drive extruder[2][6]
Hotend & Nozzle
Max nozzle temp claimed AND firmware max temp limit (both values)	500 °C maximum nozzle temperature (manufacturer specification)[1]	<=300 °C claimed[2][6]
Stock nozzle size & sizes included in box	0.4 mm default; 0.6 and 0.8 mm optional[1]	0.4 mm included; 0.2, 0.6 and 0.8 mm optional[2]
Heated Bed & Surface
Max bed temp claimed AND firmware limit	Up to 300 °C heated build plate[1]	<=100 °C claimed[2][6]
Bed surface (material, texture, coating), single/double-sided	Flexible build plates with a vacuum adsorption system[1]	Powder-coated PEI steel plate[2][6]
Leveling & Z-Offset
Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe)	Auto levelling; probe technology not named[1]	Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[2][6][3]
Filament Handling & Detection
Filament runout sensor (type, location)	Not documented	Filament sensor fitted, with filament-runout resume; type and location not published[2][6]
Spool holder location & max spool size; drybox compatibility	Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1]	Not documented
Electronics & Power
Host computer (SoC, RAM, storage) if firmware runs on embedded Linux	Not documented	Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][6]
PSU (brand, wattage, rail voltage)	Not documented	Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[2][6]
Input voltage (110/220 V, switch or auto)	Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1]	Not documented
Total rated power draw	15 kW maximum[1]	Not documented
Firmware & Openness
Firmware base & current version (Klipper fork / Marlin fork / proprietary)	Proprietary; slicing is INTAMSUITE (Windows only)[1]	Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[2][6]
Connectivity, UI & Camera
Display: size, type, touch?	10-inch touchscreen[1]	Not documented
WiFi (band/standard), Ethernet, USB ports, SD/flash-drive	Wi-Fi, Ethernet, USB[1]	Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[2][6]
Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps)	Not documented	Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[2][6]
Materials Support
Officially supported filament list	PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1]	PLA, PETG, TPU, PETG-CF, ABS and others[2]
Safety
Certifications (UL/ETL/CE/FCC — verify, don't assume)	CE, FCC, SGS; safety design to EN60204[1]	Not documented
Hardware safety: fusing, strain reliefs, belt covers, pinch points	Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1]	Not documented
Independently Measured Performance
Dimensional accuracy measurements (third-party, with numbers)	Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1]	Not documented

Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.

Sources for this comparison

Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
Sovol SV08 technical data table 3djake.com · 2026-08 · vendor