3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 610 HT vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 610 HT comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | LulzBot |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[1] | LulzBot TAZ Pro Long Bed 3D Printer[2] |
| Street price (USD; dated snapshot per entry) | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[1] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[1][3] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 610 x 508 x 508 mm (24 x 20 x 20 in)[1] | 282 x 582 x 285 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 1710 x 1425 x 2350 mm including the warning lights[1] | Not documented |
| Net weight (kg) | 1450 kg[1] | Not documented |
| Frame construction & material | Servo control system on high-precision ball screws; liquid cooling plus fans[1] | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[2] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[1] | Open frame, no enclosure[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Servo-driven ball-screw motion system; two nozzles[1] | Cartesian bedslinger[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[1] | Not documented |
| Max travel speed | Not documented | 150 mm/s maximum travel speed, firmware-limited[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament[1] | Asteroid 285 tool head[2] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C maximum nozzle temperature (manufacturer specification)[1] | 290 °C maximum, firmware-limited[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | 1.2 mm GammaMaster steel[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | GammaMaster steel[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Up to 300 °C heated build plate[1] | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Flexible build plates with a vacuum adsorption system[1] | Blue spring-steel magnetic flex bed system[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto levelling; probe technology not named[1] | BLTouch, 32-point automatic mesh calibration[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with runout and stripping detection[2] |
| Spool holder location & max spool size; drybox compatibility | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[2] |
| Input voltage (110/220 V, switch or auto) | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[1] | Not documented |
| Total rated power draw | 15 kW maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is INTAMSUITE (Windows only)[1] | Marlin[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 10-inch touchscreen[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Wi-Fi, Ethernet, USB[1] | USB serial; 16 GB flash drive included for standalone printing[2] |
| Materials Support | ||
| Officially supported filament list | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, SGS; safety design to EN60204[1] | Not documented |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard with extended options. Made in the USA[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[1] | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor