3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 410 vs Voron Trident
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 410 comparisonsMore Voron Trident comparisons
| Property | INTAMSYS FUNMAT PRO 410INDUSTRIAL | Voron TridentCOREXY |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Voron Design |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Intamsys Funmat Pro 410, described as a dual-extrusion PEEK 3D printer[1] | Voron Trident, current revision R2. Sold as "Voron Trident R2 3D Printer Kit by LDO"[2] |
| Street price (USD; dated snapshot per entry) | $27,995.00 at Top 3D Shop, in stock with a 5-10 business-day lead time, checked Aug 2026[1] | $1,274.99 for the LDO kit at Fabreeko, on pre-order with a mid-to-late September ship estimate, checked Aug 2026. Fabreeko's live product feed shows the Trident kit at $1,199.99 and unavailable, so the figure depends on which variant is selected[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Distinguish from the 610 HT carefully: the 410 has a 90 °C chamber and 160 °C plate, the 610 HT a 300 °C chamber and 300 °C plate. Both quote a 500 °C extruder, so extruder temperature alone will not tell them apart. The 410's two nozzles are asymmetric — one fixed, one on a lift[1][4] | Two size variants on the LDO kit: Rev D 250 mm and Rev D+ 300 mm. Distinguished from the Voron 2.4 by the Z system: Trident has a fixed gantry with three Z motors lifting the bed, while the 2.4 lifts the gantry on four belted Z motors. Colour options black, space grey, blue[2][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 305 x 305 x 406 mm (12 x 12 x 16 in)[1] | 250 x 250 x 250 mm or 300 x 300 x 300 mm depending on variant. Sortable value is the 300 mm kit[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 720 x 680 x 1470 mm[1] | Not documented |
| Net weight (kg) | 220 kg[1] | Not documented |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame, self-assembly[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed heated chamber with air filtering[1] | Not documented |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 90 °C chamber (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two nozzles, one fixed and one that lifts out of the way[1] | CoreXY with a fixed gantry; three independent Z stepper motors raise the bed and perform bed levelling[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Three independent Z stepper motors under the bed[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | LDO Leviathan board: 5 x TMC2209 plus 2 x TMC5160 HV-capable drivers[2] |
| Speed & Acceleration | ||
| Max travel speed | Maximum XY travel speed 500 mm/s (manufacturer figure); maximum XY acceleration 5,000 mm/s2[1] | Not documented |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 maximum XY acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament, with an auto-cleaning station[1] | Bondtech Integrated Drive Gear Assembly (IGDA) with a Clockwork 2 motor[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | E3D Revo High Flow with a 60 W heater[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C extruder temperature (manufacturer specification)[1] | Not documented |
| Heater cartridge power (W) | Not documented | 60 W (E3D Revo High Flow heater in the LDO kit)[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default, 0.6 mm selectable[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C platform temperature[1] | Not documented |
| Bed surface (material, texture, coating), single/double-sided | Ceramic glass build plate[1] | LDO bed heater with a pre-installed magnet sheet and edge-to-edge heating[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto-levelling with high-precision sensors; sensor technology not named[1] | Omron inductive probe supplied; Klicky-mod parts also included in the kit[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament jam warning and filament absence warning[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Heated dry box for filament, up to 70 °C[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Air filtering fitted; media not specified. Cooling is water-cooled[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Leviathan control board; Nitehawk SB USB toolhead board with an integrated accelerometer[2] |
| Input voltage (110/220 V, switch or auto) | 200-240 V / 15 A, 50-60 Hz[1] | Not documented |
| Total rated power draw | 3 kW maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is IntamSuite (Windows only)[1] | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch smart touch panel[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Wi-Fi, Internet[1] | Not documented |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera fitted[1] | Not documented |
| LED chamber/toolhead lighting | Not documented | COB LED chamber lighting included[2] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-failure recovery supported; mechanism not published[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PEEK, PEKK, PEI, PPSU, PC, nylon, ABS, HIPS, PETG, PLA, PVA and CF-filled grades[1] | Not documented |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, SGS, FCC[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 15.6 um, Z 1.56 um (manufacturer specification)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Voron Trident R2 kit by LDO fabreeko.com · 2026-08 · vendor
- Fabreeko Voron collection product feed (live prices) fabreeko.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Voron 2.4 R2 (Rev D+) kit by LDO fabreeko.com · 2026-08 · vendor