3D Printing InfoPrinter comparison
INTAMSYS FUNMAT PRO 410 vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT PRO 410 comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | INTAMSYS FUNMAT PRO 410INDUSTRIAL | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | LulzBot |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Intamsys Funmat Pro 410, described as a dual-extrusion PEEK 3D printer[1] | LulzBot TAZ Pro Long Bed 3D Printer[2] |
| Street price (USD; dated snapshot per entry) | $27,995.00 at Top 3D Shop, in stock with a 5-10 business-day lead time, checked Aug 2026[1] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Distinguish from the 610 HT carefully: the 410 has a 90 °C chamber and 160 °C plate, the 610 HT a 300 °C chamber and 300 °C plate. Both quote a 500 °C extruder, so extruder temperature alone will not tell them apart. The 410's two nozzles are asymmetric — one fixed, one on a lift[1][3] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[2][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 305 x 305 x 406 mm (12 x 12 x 16 in)[1] | 282 x 582 x 285 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 720 x 680 x 1470 mm[1] | Not documented |
| Net weight (kg) | 220 kg[1] | Not documented |
| Frame construction & material | Not documented | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed heated chamber with air filtering[1] | Open frame, no enclosure[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 90 °C chamber (manufacturer specification, actively heated)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Two nozzles, one fixed and one that lifts out of the way[1] | Cartesian bedslinger[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[2] |
| Speed & Acceleration | ||
| Max travel speed | Maximum XY travel speed 500 mm/s (manufacturer figure); maximum XY acceleration 5,000 mm/s2[1] | 150 mm/s maximum travel speed, firmware-limited[2] |
| Max acceleration (claimed, mm/s²) | 5,000 mm/s2 maximum XY acceleration (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two nozzles, 1.75 mm filament, with an auto-cleaning station[1] | Asteroid 285 tool head[2] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 500 °C extruder temperature (manufacturer specification)[1] | 290 °C maximum, firmware-limited[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default, 0.6 mm selectable[1] | 1.2 mm GammaMaster steel[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | GammaMaster steel[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C platform temperature[1] | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Ceramic glass build plate[1] | Blue spring-steel magnetic flex bed system[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Auto-levelling with high-precision sensors; sensor technology not named[1] | BLTouch, 32-point automatic mesh calibration[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament jam warning and filament absence warning[1] | Filament sensor with runout and stripping detection[2] |
| Spool holder location & max spool size; drybox compatibility | Heated dry box for filament, up to 70 °C[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Air filtering fitted; media not specified. Cooling is water-cooled[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[2] |
| Input voltage (110/220 V, switch or auto) | 200-240 V / 15 A, 50-60 Hz[1] | Not documented |
| Total rated power draw | 3 kW maximum[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; slicing is IntamSuite (Windows only)[1] | Marlin[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch smart touch panel[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Wi-Fi, Internet[1] | USB serial; 16 GB flash drive included for standalone printing[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Camera fitted[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-failure recovery supported; mechanism not published[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PEEK, PEKK, PEI, PPSU, PC, nylon, ABS, HIPS, PETG, PLA, PVA and CF-filled grades[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, SGS, FCC[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard with extended options. Made in the USA[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Resolution XY 15.6 um, Z 1.56 um (manufacturer specification)[1] | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor