3D Printing InfoPrinter comparison
INTAMSYS FUNMAT HT Enhanced vs Original Prusa i3 MK3S+
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT HT Enhanced comparisonsMore Original Prusa i3 MK3S+ comparisons
| Property | INTAMSYS FUNMAT HT EnhancedINDUSTRIAL | Original Prusa i3 MK3S+BEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Prusa Research |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Intamsys Funmat HT Enhanced, product number M-QRS-2X8E[1] | Original Prusa i3 MK3S+. The only version still listed in Aug 2026 is the "Original Prusa i3 MK3S+ 10th Anniversary Edition"[2] |
| Street price (USD; dated snapshot per entry) | $6,995.00 at Top 3D Shop, reduced from $8,995.00, in stock, checked Aug 2026[1] | $1,199.00 assembled, $899.00 as a kit, for the 10th Anniversary Edition on prusa3d.com, Aug 2026. This is above the price the standard MK3S+ sold at, so do not read it as the MK3S+ street price[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two extruder configurations with very different ceilings: standard up to 300 °C, high-temperature up to 450 °C. A quoted "450 °C" applies only to the HT extruder. Larger siblings Funmat Pro 410 (305x305x406, 500 °C, dual nozzle) and Funmat Pro 610HT (610x508x508, 300 °C chamber) are separate machines[1][3][4] | Only the 10th Anniversary Edition remains on sale; the standard MK3S+ is gone from Prusa's printer listing. Two official upgrade paths change the machine substantially and are frequently confused with it: MK3.5 (xBuddy board and new LCD, keeps the MK3 extruder) and MK3.9 (adds the Nextruder). A caution on Prusa's own pages: the "Awards & Press Reviews" paragraph about the MK3S is reproduced verbatim on the MINI+ product page, so award text found on a Prusa page does not necessarily belong to the printer on that page[2][5][6][7] |
| Market position: superseded? successor announced? | Not documented | Superseded by the MK4/MK4S line. Prusa cut MK3S+ prices at the MK4 launch in March 2023 and said it would keep selling the MK3S+ at a lower price and hold spare parts in stock[6][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 25 x 21 x 21 cm = 250 x 210 x 210 mm (manufacturer figure)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 530 x 500 x 530 mm[1] | 500 x 550 x 400 mm (X x Y x Z), without the spool holder[2] |
| Net weight (kg) | 167 lb (approximately 76 kg)[1] | 7 kg (without spool)[2] |
| Frame construction & material | Not documented | Cut aluminium frame - Prusa's MK4 announcement contrasts "the cut aluminum frame we used so far" with the MK4's new die-cast frame[6] |
| Enclosure: open / enclosed; panel material; door/lid | Heated, enclosed build chamber with an in-chamber camera[1] | Open frame; the Original Prusa Enclosure is an optional separate product[6] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 90 °C heated chamber (manufacturer specification for an actively heated chamber)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Cartesian i3 bed-slinger. Prusa's MK4 announcement notes the MK3S+ Y-axis profiles and heatbed were among the few parts carried into the MK4[6] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic 2130 drivers at 256 microstepping on the EINSY RAMBo 8-bit board, co-developed with UltiMachine; sensorless homing on X and Y[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-300 mm/s print speed range (manufacturer figure)[1] | Not documented |
| Max travel speed | Not documented | "200+ mm/s" max travel speed (manufacturer figure, no measurement basis given)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive with Bondtech gears and an E3D V6 hotend[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Standard extruder up to 300 °C; high-temperature extruder up to 450 °C[1] | 300 C claimed max nozzle temperature[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C platform temperature[1] | 120 C max heatbed temperature[2] |
| Bed surface (material, texture, coating), single/double-sided | Aluminium plate with high-borosilicate glass[1] | Removable magnetic spring-steel sheets in several finishes; heatbed with cold-corner compensation[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; probe technology not stated[1] | SuperPINDA inductive probe (Prusa's temperature-drift-free replacement for the original PINDA), driving automatic mesh bed levelling and a self-test routine[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | IR filament sensor built in, supporting filament auto-loading; the print pauses when filament runs out[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | EINSY RAMBo 8-bit board, co-developed with UltiMachine[2] |
| Input voltage (110/220 V, switch or auto) | Not documented | Custom Delta PSU with hardware-based power panic[2] |
| Total rated power draw | Not documented | Power consumption 80 W on PLA settings, 120 W on ABS settings[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | prusa3d/Prusa-Firmware on GitHub, GPL-3.0, whose README states it is "proudly based on Marlin 1.0.x" and covers the MK3S/MK3/MK2.5S/MK2.5 line; last pushed August 2025. Updated over USB from a PC[8] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | SD card (16 GB card included); Ethernet and Wi-Fi only via an optional Raspberry Pi[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | In-chamber camera[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PEEK, PEI, PEKK, PPSU, PA/CF, PC, PC alloys, PA, ABS, carbon-fibre-filled, metal-filled, fibreglass-filled, ASA, PETG, ESD-safe, HIPS, TPU, PLA, PVA[1] | PLA, PETG, ASA, ABS, PC, CPE, PVA/BVOH, PVB, HIPS, PP, Flex, nGen, Nylon, carbon-filled, woodfill and other filled materials[2] |
| Safety | ||
| Thermal runaway protection (verify in firmware source if at all possible) | Not documented | Prusa shipped Thermal Model protection to the MK3 line as a firmware update shortly before the MK4 launch; the firmware is open-source and auditable[6][8] |
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | FCC and CE[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 2-year warranty for consumers in the EU, Liechtenstein, Switzerland, Norway and Iceland; 1 year for EU enterprises and 1 year for the rest of the world, which includes the United States. A printer bought from a reseller or privately carries 1 year from the original delivery date and is handled by the reseller. Prusa advertises 24/7 chat and e-mail support in seven languages[9][10] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Position accuracy X/Y 12.5 um, Z 1.25 um (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat HT Enhanced product listing top3dshop.com · 2026-08 · vendor
- Original Prusa i3 MK3S+ 10th Anniversary Edition product page (Technical Parameters + Full Features List) prusa3d.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- Original Prusa MINI+ Semi-assembled 3D Printer product page (Technical Parameters + Full Features List, January 2025 Edition) prusa3d.com · 2026-08 · vendor
- Prusa blog - Original Prusa MK4 is here (published 29 March 2023), including the MK4 specification table and launch prices blog.prusa3d.com · 2026-08 · doc
- Prusa 3D printers category listing with live e-shop prices, Aug 2026 prusa3d.com · 2026-08 · vendor
- GitHub - prusa3d/Prusa-Firmware (MK3 line, GPL-3.0, based on Marlin 1.0.x) github.com · 2026-08 · doc
- Prusa Knowledge Base - Warranty help.prusa3d.com · 2026-08 · doc
- Original Prusa MK4S 3D Printer product page (Technical Parameters + CORE One+/MK4S/XL comparison table) prusa3d.com · 2026-08 · vendor