3D Printing InfoPrinter comparison
INTAMSYS FUNMAT HT Enhanced vs Positron V3.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore INTAMSYS FUNMAT HT Enhanced comparisonsMore Positron V3.2 comparisons
| Property | INTAMSYS FUNMAT HT EnhancedINDUSTRIAL | Positron V3.2COREXY |
|---|---|---|
| Identity | ||
| Brand | INTAMSYS | Positron3D |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Intamsys Funmat HT Enhanced, product number M-QRS-2X8E[1] | LDO Positron v3.2 3D Printer Kit, revision v3.2 Rev A[2] |
| Street price (USD; dated snapshot per entry) | $6,995.00 at Top 3D Shop, reduced from $8,995.00, in stock, checked Aug 2026[1] | Not documented |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two extruder configurations with very different ceilings: standard up to 300 °C, high-temperature up to 450 °C. A quoted "450 °C" applies only to the HT extruder. Larger siblings Funmat Pro 410 (305x305x406, 500 °C, dual nozzle) and Funmat Pro 610HT (610x508x508, 300 °C chamber) are separate machines[1][3][4] | The defining trait is the inverted geometry: the print head is below the bed and the machine prints upside down. Sold as a self-assembly kit; the complete printed-parts set is a separate purchase. A hard storage case is included[2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 260 x 260 x 260 mm[1] | 180 x 180 x 165 mm[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 530 x 500 x 530 mm[1] | 200 x 200 x 70 mm folded, 200 x 200 x 270 mm unfolded[2] |
| Net weight (kg) | 167 lb (approximately 76 kg)[1] | 3 kg net; 5.5 kg with the hard case[2] |
| Frame construction & material | Not documented | Folding frame designed to fit in a filament box; supplied with a black hard case[2] |
| Enclosure: open / enclosed; panel material; door/lid | Heated, enclosed build chamber with an in-chamber camera[1] | Open frame[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | 90 °C heated chamber (manufacturer specification for an actively heated chamber)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | CoreXY, inverted — the machine prints upside down[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 30-300 mm/s print speed range (manufacturer figure)[1] | 250 mm/s maximum print speed (manufacturer claim)[2] |
| Max acceleration (claimed, mm/s²) | Not documented | 8,000 mm/s2 (manufacturer claim)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Bowden-style, single extrusion[2] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | PS plated-copper nozzle, 0.4 mm[2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Standard extruder up to 300 °C; high-temperature extruder up to 450 °C[1] | 260 °C maximum (manufacturer claim)[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Plated copper[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 160 °C platform temperature[1] | 85 °C maximum bed temperature — the lowest in this group, and the reason the material list stops at PETG[2] |
| Bed surface (material, texture, coating), single/double-sided | Aluminium plate with high-borosilicate glass[1] | Heated removable ITO glass bed[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; probe technology not stated[1] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | LDO Positron mainboard[2] |
| PSU (brand, wattage, rail voltage) | Not documented | DC 24 V, 200 W[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Klipper[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 3.5-inch LCD touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Not documented | Wi-Fi, USB, Ethernet[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | In-chamber camera[1] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit, manufactured in China[2] |
| Materials Support | ||
| Officially supported filament list | PEEK, PEI, PEKK, PPSU, PA/CF, PC, PC alloys, PA, ABS, carbon-fibre-filled, metal-filled, fibreglass-filled, ASA, PETG, ESD-safe, HIPS, TPU, PLA, PVA[1] | PLA and PETG only, per the manufacturer[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | FCC and CE[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Position accuracy X/Y 12.5 um, Z 1.25 um (manufacturer specification, not an independent measurement)[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Intamsys Funmat HT Enhanced product listing top3dshop.com · 2026-08 · vendor
- LDO Positron v3.2 3D Printer Kit matterhackers.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor