3D Printing InfoPrinter comparison
Formlabs Form 4L vs Sovol SV08
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Formlabs Form 4L comparisonsMore Sovol SV08 comparisons
| Property | Formlabs Form 4LRESIN | Sovol SV08COREXY |
|---|---|---|
| Identity | ||
| Brand | Formlabs | Sovol |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Formlabs Form 4L[1] | Sovol SV08 3D Printer[2][3] |
| Street price (USD; dated snapshot per entry) | Not documented | $549.00 on sovol3d.com against a $599.00 compare-at price, in stock, checked Aug 2026 (Canada warehouse quoted as shipping end of September)[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same Low Force Display engine as the Form 4 but a different machine on every physical figure: 353 x 196 x 350 mm vs 200 x 125 x 210, 46 um vs 50 um pixels, 58.5 kg vs 18.3 kg, 900 W vs 480 W, two resin cartridges vs one. Formlabs lists Basic, Premium and Complete packages, whose prices are not printer-only prices, and no printer-only USD figure was found on a live listing[1] | Sibling SV08 Max is a much larger 500x500x500 machine at $1,099 with a 50 mm3/s flow rate, TMC5160 XY drivers and CAN bus; the SV08 is 30 mm3/s with TMC2209s. Do not carry SV08 Max figures onto the SV08. An eddy-current scanning kit and a 5-inch touchscreen are sold as separate upgrades[3][4][5][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 353 x 196 x 350 mm (Formlabs quotes 24.2 litres)[1] | 350 x 350 x 345 mm advertised[2][5] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 664 x 528 x 794 mm[1] | 550 x 537 x 575 mm. Sovol's page says this includes screen and filament holder; 3DJake says it excludes the spool holder[2][5] |
| Net weight (kg) | 58.5 kg[1] | 21.5 kg gross (3DJake). Sovol does not publish a net weight[5] |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame; Sovol states the design is inspired by the Voron 2.4 and that software, firmware and hardware are open source with design files on GitHub, with $2 per unit donated to the Voron project[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed cabinet with a UV-blocking cover. Operating temperature 18-28 C[1] | Open frame as shipped; Sovol sells an enclosure kit separately (an enclosure-kit package is listed for the SV08 Max)[2][4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Masked stereolithography (MSLA) with the Low Force Display engine; straight-lift peel[1] | CoreXY[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | TMC2209[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 700 mm/s maximum (manufacturer claim)[2][5] |
| Max acceleration (claimed, mm/s²) | Not documented | 40,000 mm/s2 maximum (manufacturer claim)[2][5] |
| Max volumetric flow claimed (mm³/s) | Not documented | <=30 mm3/s (manufacturer claim)[2][5] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Planetary-gear direct-drive extruder[2][5] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=300 °C claimed[2][5] |
| Stock nozzle size & sizes included in box | Not documented | 0.4 mm included; 0.2, 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | <=100 °C claimed[2][5] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Powder-coated PEI steel plate[2][5] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Inductive sensor plus a pressure (load) sensor. An eddy-current scanning kit is sold as an upgrade[2][5][3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor fitted, with filament-runout resume; type and location not published[2][5] |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Allwinner H616 quad-core Cortex-A53, 1 GB RAM (512 MB + 512 MB), 8 GB eMMC[2][5] |
| PSU (brand, wattage, rail voltage) | Not documented | Conflicting: Sovol's spec table says 150 W / 24 V, while 3DJake's table gives a rated power of 1000 W at both 110 V and 220 V. The two are only reconcilable if the bed is mains-heated separately from the 24 V logic supply, which Sovol does not state[2][5] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 9 A, 50/60 Hz, 900 W[1] | Not documented |
| Total rated power draw | 900 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; print preparation is PreForm[1] | Klipper. Sovol publishes the design files on GitHub and describes software, firmware and hardware as fully open source[2][5] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch interactive touchscreen, 1280 x 800 (control panel — not the masking LCD, see W1)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi, Gigabit Ethernet, USB-C 2.0[1] | Ethernet and Wi-Fi 2.4 GHz, WPA2 only (WPA3 explicitly not supported)[2][5] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Not documented | Camera listed as fitted by Sovol; 3DJake lists a camera as an accessory. Resolution not published[2][5] |
| Materials Support | ||
| Officially supported filament list | Formlabs resin range as for the Form 4; biocompatible materials require a B-series machine[1] | PLA, PETG, TPU, PETG-CF, ABS and others[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XY dimensional tolerance +/-0.15% — a manufacturer specification[1] | Not documented |
| Resin & MSLA | ||
| Masking LCD | Low Force Display masking LCD with a 46 um pixel size. Formlabs does not publish the screen diagonal or pixel count[1] | Not documented |
| Light source | Backlight unit with uniform-wavelength LEDs behind collimating lenses, with integrated cooling[1] | Not documented |
| Layer height range | 25-200 um[1] | Not documented |
| Resin vat & feeding | Two next-generation resin cartridges. No vat capacity published[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Formlabs resin printer technical specifications (Form 4 / 4B / 4L) formlabs.com · 2026-08 · vendor
- Sovol SV08 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Sovol SV08 Max 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol SV08 technical data table 3djake.com · 2026-08 · vendor