3D Printing InfoPrinter comparison
Formlabs Form 4L vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Formlabs Form 4L comparisonsMore Sovol SV06 Plus comparisons
| Property | Formlabs Form 4LRESIN | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | Formlabs | Sovol |
| Class | RESIN | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Formlabs Form 4L[1] | Sovol SV06 Plus[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Same Low Force Display engine as the Form 4 but a different machine on every physical figure: 353 x 196 x 350 mm vs 200 x 125 x 210, 46 um vs 50 um pixels, 58.5 kg vs 18.3 kg, 900 W vs 480 W, two resin cartridges vs one. Formlabs lists Basic, Premium and Complete packages, whose prices are not printer-only prices, and no printer-only USD figure was found on a live listing[1] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[2][3] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[4][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 353 x 196 x 350 mm (Formlabs quotes 24.2 litres)[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 664 x 528 x 794 mm[1] | Not documented |
| Net weight (kg) | 58.5 kg[1] | Not documented |
| Frame construction & material | Not documented | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed cabinet with a UV-blocking cover. Operating temperature 18-28 C[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Masked stereolithography (MSLA) with the Low Force Display engine; straight-lift peel[1] | Cartesian i3 bedslinger[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct-drive extruder, single[2] |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 9 A, 50/60 Hz, 900 W[1] | Not documented |
| Total rated power draw | 900 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary; print preparation is PreForm[1] | Not documented |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch interactive touchscreen, 1280 x 800 (control panel — not the masking LCD, see W1)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi, Gigabit Ethernet, USB-C 2.0[1] | USB connection and mini-SD card[2] |
| Materials Support | ||
| Officially supported filament list | Formlabs resin range as for the Form 4; biocompatible materials require a B-series machine[1] | 1.75 mm filament; no per-material list published on the listing[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XY dimensional tolerance +/-0.15% — a manufacturer specification[1] | Not documented |
| Resin & MSLA | ||
| Masking LCD | Low Force Display masking LCD with a 46 um pixel size. Formlabs does not publish the screen diagonal or pixel count[1] | Not documented |
| Light source | Backlight unit with uniform-wavelength LEDs behind collimating lenses, with integrated cooling[1] | Not documented |
| Layer height range | 25-200 um[1] | Not documented |
| Resin vat & feeding | Two next-generation resin cartridges. No vat capacity published[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Formlabs resin printer technical specifications (Form 4 / 4B / 4L) formlabs.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor