3D Printing InfoPrinter comparison
Formlabs Form 4 vs Voron 0.2
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore Formlabs Form 4 comparisonsMore Voron 0.2 comparisons
| Property | Formlabs Form 4RESIN | Voron 0.2COREXY |
|---|---|---|
| Identity | ||
| Brand | Formlabs | Voron Design |
| Class | RESIN | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Formlabs Form 4 3D Printer[1][2] | Voron 0.2, current revision R1. Sold under kit vendors' names: "Voron V0.2-S1 (R1) 3D Printer Kit by LDO & HoneyBadger", "Voron 0.2 R1 Latest Version CoreXY 3D Printer Kit" (Formbot)[3][4] |
| Street price (USD; dated snapshot per entry) | Starting at $2,625.00 at GoEngineer, in stock, checked Aug 2026. Formlabs sells the printer as part of packages (Form 4 Complete Package etc.), so package prices are much higher than the printer-only figure[2] | There is no single price: Voron is an open design and kits come from several vendors. Formbot's kit is $328.06 (was $349.00, 6% off), in stock, checked Aug 2026. The LDO & HoneyBadger V0.2-S1 kit is $639.99 but sold out. Neither figure includes printed parts unless the option is selected[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Three machines share this platform and are constantly conflated. Form 4: 200 x 125 x 210 mm, 50 um pixels, 18.3 kg, 480 W, one resin cartridge, NOT biocompatible. Form 4B: identical hardware but validated for 38 Formlabs materials including 15 biocompatible. Form 4L: 353 x 196 x 350 mm, 46 um pixels, 58.5 kg, 900 W, two cartridges[1] | Two things get conflated. First, revision: R1 is the current one, adding a filament-runout sensor, MR85 bearings and fastener changes. Second, kit vendor: the LDO/HoneyBadger S1 kit ships an SKR Pico, E3D Revo, HoneyBadger dual-sided PEI/CF bed and 200 W supply, while the Formbot kit ships a TZ V6 or Dragon hotend and a 150 W supply, so hotend and PSU specs are vendor-specific, not model-specific. Printed parts are an extra on both[3][4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 200 x 125 x 210 mm (Formlabs quotes 5.25 litres)[1][2] | 120 x 120 x 120 mm[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 398 x 367 x 554 mm[1][2] | Not documented |
| Net weight (kg) | 18.3 kg[1][2] | Not documented |
| Frame construction & material | Not documented | Aluminium-extrusion CoreXY frame with acrylic panels (LDO kit); the LDO/HoneyBadger build uses a 100 mm top hat. X axis on a genuine HIWIN rail, Y and Z on HoneyBadger stainless rails[3] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed cabinet with a hinged UV-blocking cover. Operating temperature 18-28 C[1] | Enclosed by acrylic panels in the LDO kit[3] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Masked stereolithography (MSLA). Formlabs brands the engine Low Force Display; straight-lift peel[1][2] | CoreXY with the build plate moving in Z[3][4] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | Genuine HIWIN linear rail on X in the LDO kit[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | Not documented | 250 mm/s max print speed, 300 mm/s max travel (Formbot kit listing). This is a kit-vendor figure, not a Voron Design specification[4] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Direct drive in a Mini Stealthburner toolhead with a picobilical board and umbilical cable (LDO kit)[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Kit-dependent: E3D Revo (Voron edition) in the LDO kit; TZ V6, Dragon standard-flow or Dragon high-flow in the Formbot kit[3][4] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 300 °C on the Formbot kit listing. The LDO kit's E3D Revo has its own limit, not stated on the listing[4] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C (Formbot kit listing)[4] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | HoneyBadger dual-sided P-series plate in the LDO kit: smooth black PEI on one face, carbon fibre on the other, on a Kirigami mount with an edge-to-edge polyimide film heater[3] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | Kit-dependent. LDO kit: SKR Pico (LDO Edition) with a Raspberry Pi 4B as host[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 200 W (LDO kit) or 150 W (Formbot kit)[3][4] |
| Input voltage (110/220 V, switch or auto) | 100-240 VAC, 4.8 A, 50/60 Hz, 480 W[1] | Not documented |
| Total rated power draw | 480 W[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Proprietary. Print preparation is PreForm; fleet management is Formlabs Dashboard[2] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch interactive touchscreen, 1280 x 800 (control panel — not the masking LCD, see W1)[1] | Not documented |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi, Gigabit Ethernet (1000 Mbit), USB-C 2.0[1][2] | Not documented |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Self-assembly kit. Printed parts are not included in the LDO kit (sourced separately, e.g. through Voron's Print It Forward); the Formbot kit offers them as an option[3][4] |
| Materials Support | ||
| Officially supported filament list | Formlabs resins across rigid, tough, general purpose, flame retardant, silicone, elastic, ceramic and castable families. Biocompatible resins require the Form 4B, not the Form 4[1] | Not documented |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | XY dimensional tolerance +/-0.15% — a manufacturer specification, not an independent measurement[1][2] | Not documented |
| Resin & MSLA | ||
| Masking LCD | Low Force Display masking LCD with a 50 um pixel size and pre-tuned anti-aliasing. Formlabs does not publish the screen diagonal or pixel count[1][2] | Not documented |
| Light source | Backlight unit with 60 uniform-wavelength high-power LEDs behind collimating lenses, with integrated cooling[1][2] | Not documented |
| Vertical print speedmm/h | Maximum 100 mm/h; average 40 mm/h at a 100 um layer height (manufacturer figures — GoEngineer publishes both, which is unusually explicit about the basis). Formlabs separately claims most prints finish in under 2 hours[2][1] | Not documented |
| Layer height range | 25-200 um per Formlabs' own tech-spec page; GoEngineer's listing for the same machine says 25-300 um. Unresolved[1][2] | Not documented |
| Resin vat & feeding | Single next-generation resin cartridge; Formlabs claims 5-10x faster filling and 63% less waste. Resin tank rated for 75,000+ layers with any Formlabs material. No vat capacity published[1][2] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Formlabs resin printer technical specifications (Form 4 / 4B / 4L) formlabs.com · 2026-08 · vendor
- Formlabs Form 4 3D printer listing store.goengineer.com · 2026-08 · vendor
- Voron V0.2-S1 (R1) kit by LDO & HoneyBadger fabreeko.com · 2026-08 · vendor
- Voron 0.2 R1 CoreXY kit (Formbot) formbot3d.com · 2026-08 · vendor