3D Printing InfoPrinter comparison
FlashForge Guider 3 vs LulzBot TAZ Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 comparisonsMore LulzBot TAZ Pro comparisons
| Property | FlashForge Guider 3INDUSTRIAL | LulzBot TAZ ProBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | LulzBot |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | FlashForge Guider 3[1] | LulzBot TAZ Pro (LulzBot's own store lists it under Legacy LulzBot printers)[2] |
| Street price (USD; dated snapshot per entry) | Not documented | $4,950.00 on buy.lulzbot.com, in stock, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Base of a three-model series: Guider 3 (300x250x340), Guider 3 Plus (350x350x600, 250 mm/s, <50 dB, twin sealed 1 kg filament chambers) and Guider 3 Ultra (330x330x600 single-head / 300x330x600 dual-head, two extruders, 350 °C, 7-inch screen, 70 kg). Volumes and extruder counts differ across all three, so series-level spec boxes are unreliable[1][3][4] | Several TAZ Pro derivatives exist and their specs differ substantially: TAZ Pro S, TAZ Pro XT+, and TAZ Pro Long Bed (282 x 582 x 285 mm, 1.2 mm GammaMaster steel nozzle, 80 °C bed cap, 150 mm/s travel, BLTouch 32-point mesh). The base TAZ Pro is 285 mm cubed with a 0.5 mm hardened-steel nozzle, a 110 °C bed and 300 mm/s travel — do not mix the two spec sets[2][5] |
| Market position: superseded? successor announced? | 3DJake shows it sold out and no longer stocked; the current FlashForge store carries the Guider 3 Ultra[1][4] | Not documented |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 300 x 250 x 340 mm advertised[1] | 285 x 285 x 285 mm[2] |
| Frame construction & material | Fully assembled professional chassis[1] | Open frame; movement on GT2 belts with Igus SST rods and polymer bushings[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed with a heated chamber; 3DJake's table records "Heated chamber: Yes". Chamber temperature not published for this model[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Cartesian bedslinger[2] |
| Belts (type, width, e.g. Gates?) | Not documented | GT2 belt drive[2] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[2] |
| Speed & Acceleration | ||
| Max travel speed | Not documented | 300 mm/s maximum travel speed (manufacturer figure)[2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single[1] | Pro Dual Extruder tool head — two active-lifting hot ends for true dual-material printing[2] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 290 °C maximum hot end temperature[2] |
| Stock nozzle size & sizes included in box | 0.4, 0.6 and 0.8 mm nozzles available[1] | 0.5 mm hardened steel[2] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Not documented | Hardened steel[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | Not documented | 110 °C maximum bed temperature[2] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[2] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Dual-sided borosilicate glass with PEI film[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Not documented | Automatic 4-point mesh levelling using a 5 V contact circuit, plus automatic X-axis tramming, Z-offset and backlash compensation[2] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 4-point mesh[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with both runout and stripping detection[2] |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[2] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not documented | Marlin[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch full-colour resistive touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Wi-Fi, LAN[1] | USB serial; a 16 GB flash drive is included for standalone printing[2] |
| Materials Support | ||
| Officially supported filament list | 1.75 mm filament; 3DJake does not publish a per-material list for the base Guider 3[1] | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | Not documented | FCC, CE, RCM, ETL, CSA, OSHWA and WEEE. The OSHWA listing is the open-hardware certification[2] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard, with extended options. Made in the USA[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification, not an independent measurement)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor