3D Printing InfoPrinter comparison
FlashForge Guider 3 Ultra vs QIDI Q1 Pro
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 Ultra comparisonsMore QIDI Q1 Pro comparisons
| Property | FlashForge Guider 3 UltraINDUSTRIAL | QIDI Q1 ProCOREXY |
|---|---|---|
| Identity | ||
| Brand | FlashForge | QIDI |
| Class | INDUSTRIAL | COREXY |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Guider 3 Ultra; the FlashForge spec table gives the machine name as "Guider 3 Ultra"[1] | QIDI Q1 Pro, listed by QIDI as "Q1 Pro 3D Printer". QIDI traded as Qidi Tech until end-2024[2] |
| Release date (announcement and actual shipping) | Not documented | Not stated on QIDI's own product page; the page now carries a discontinuation notice instead of a launch date (checked Aug 2026)[2][3] |
| Street price (USD; dated snapshot per entry) | $2,399.00 against a $3,499.00 regular price on flashforge.com, but the listing checked is the refurbished SKU and is marked Sold out (Aug 2026)[1] | $499.00 on both qidi3d.com and us.qidi3d.com, checked Aug 2026 — but the listing is marked Sold Out and the page states "This model has been discontinued". qidi3d.com shows it against a $599.00 regular price; the US store shows compare-at $499.00[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Top of the Guider 3 series. Build size depends on which head is used: 330 x 330 x 600 mm with one extruder, 300 x 330 x 600 mm with both. Siblings Guider 3 (300x250x340) and Guider 3 Plus (350x350x600) are both single-extruder. A refurbished SKU exists alongside the new machine, so check which one a price refers to[1][4][5] | Succeeded by the QIDI Q2, which QIDI's own comparison on the Q1 Pro page distinguishes as 270x270x256 mm (vs 245x245x240), 370 °C hotend (vs 350 °C) and 65 °C chamber (vs 60 °C). Do not read Q2 figures onto the Q1 Pro[2][3] |
| Market position: superseded? successor announced? | Not documented | Discontinued and out of production; QIDI states spare parts and support for existing owners remain available. Replaced by the Q2[2][3] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 330 x 600 mm with a single extruder; 300 x 330 x 600 mm when both extruders are in use[1] | 245 x 245 x 240 mm advertised (QIDI). No independently measured usable envelope found[2][6] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 635 x 550 x 1070 mm; packaging 775 x 690 x 1235 mm[1] | 477 x 467 x 489 mm machine dimensions (QIDI)[2][6] |
| Net weight (kg) | 70 kg net, 86 kg gross[1] | 17 kg net, 20.3 kg gross (QIDI). 3DJake lists the 20.3 kg figure as gross weight[2][6] |
| Frame construction & material | Enclosed professional chassis; FlashForge describes a lightweight, stable structure for high-speed operation[1] | Metal CoreXY motion frame with panelled enclosure; QIDI publishes no frame-material breakdown for this model[2] |
| Enclosure: open / enclosed; panel material; door/lid | Closed design with an air filter fitted[1] | Fully enclosed with independent chamber heating to 60 °C; QIDI does not publish the panel materials for this model[2][6] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | 60 °C, actively heated (manufacturer claim — this is a heater setpoint, not a measured passive figure)[2][6] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with two extruders, per a third-party buyer's guide. FlashForge's own spec table does not state the kinematics[7][1] | CoreXY[6] |
| X-axis guide type (rods / linear rails / V-wheels; size) | Not documented | 10 mm linear steel rods with automatically tensioned belt (manufacturer description)[6] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Not documented | Independent dual Z lead-screw motors[6] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-500 mm/s printing speed, 500 mm/s maximum travel speed (manufacturer figures)[1] | 600 mm/s, worded by QIDI as maximum tool-head speed (manufacturer claim, not a sustained printing speed)[2][6] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1] | <=20,000 mm/s2 (manufacturer claim)[2][6] |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Active vibration compensation, which FlashForge says was enhanced for this model. Implementation not named[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | Direct-drive extruder with hardened steel gears[2][6] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Tri-metal hotend with a ceramic heater plate and a bimetal nozzle, 0.4 mm standard[2][6] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 °C maximum extruder temperature (manufacturer claim)[1] | <=350 °C claimed. No firmware max_temp verified for this model[2][6] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C bed setting supported (manufacturer figure)[1] | <=120 °C claimed. No firmware limit verified for this model[2][6] |
| Bed surface (material, texture, coating), single/double-sided | Replaceable flexible steel-plate platform, magnetic. No glass bed[1] | Double-sided textured PEI plate on an aluminium substrate bed[2][6] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Full-auto one-click levelling; probe technology not named[1] | Automatic levelling; QIDI markets it as "hands-free automatic levelling" with dual sensors, without naming the probe technology[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Filament run-out sensor fitted; QIDI also lists filament tangle detection without describing the mechanism[6] |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Auxiliary part-cooling fan plus a chamber circulation fan (fan count and duct design not published)[6] |
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Air filter fitted; filter media not specified in the FlashForge table[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz[1] | 100-240 VAC, 50/60 Hz[6] |
| Total rated power draw | 850 W maximum[1] | 350 W plus 300 W for chamber heating (rated)[2][6] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; slicers are Orca-Flashforge and FlashPrint 5, with OrcaSlicer listed as compatible[1] | Klipper, running on a 64-bit processor per QIDI. Exact fork and version not published on the product page[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touch LCD[1] | 4.3-inch touchscreen, 272 x 480[2][6] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi, plus cloud[1] | Wi-Fi 6 (QIDI states "150M 2.4G") and USB 2.0. No Ethernet listed for this model[2][6] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Remote camera monitoring and time-lapse video supported; resolution not published[1] | Built-in camera, up to 1080p, timelapse supported. Framerate not published[2][6] |
| Calibration Routines & QoL | ||
| Assembly level & time from unbox to first print | Not documented | Ships fully assembled[2] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery supported; mechanism not published. Automatic shutdown also supported[1] | Power-loss recovery listed as a feature; mechanism not published[6] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, ASA, PETG, CoPA, PLA-CF, PETG-CF, PAHT-CF, PAHT-GF, PET-CF, PET-GF, PA12-CF, PA-CF, PA-GF, NexPA-CF25[1] | QIDI lists compatibility with common filaments; storage 32 GB eMMC. No per-material list published on the current page beyond the general claim[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, RoHS (as printed in FlashForge's own spec table)[1] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1-year coverage, 14-day no-reason return, lifetime tech guidance (QIDI's standard terms as shown on its store)[8] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor
- QIDI Q1 Pro product page (global store) qidi3d.com · 2026-08 · vendor
- QIDI Q1 Pro product page (US store) us.qidi3d.com · 2026-08 · vendor
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- QIDI Tech Q1 Pro technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review
- QIDI Max4 product page (US store) us.qidi3d.com · 2026-08 · vendor