3D Printing InfoPrinter comparison
FlashForge Guider 3 Ultra vs INTAMSYS FUNMAT PRO 610 HT
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 Ultra comparisonsMore INTAMSYS FUNMAT PRO 610 HT comparisons
| Property | FlashForge Guider 3 UltraINDUSTRIAL | INTAMSYS FUNMAT PRO 610 HTINDUSTRIAL |
|---|---|---|
| Identity | ||
| Brand | FlashForge | INTAMSYS |
| Class | INDUSTRIAL | INDUSTRIAL |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Guider 3 Ultra; the FlashForge spec table gives the machine name as "Guider 3 Ultra"[1] | INTAMSYS FUNMAT PRO 610 HT, a high-temperature industrial 3D printer[2] |
| Street price (USD; dated snapshot per entry) | $2,399.00 against a $3,499.00 regular price on flashforge.com, but the listing checked is the refurbished SKU and is marked Sold out (Aug 2026)[1] | $139,500.00 at Top 3D Shop, reduced from $159,500.00, in stock with a 2-6 week lead time, checked Aug 2026[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Top of the Guider 3 series. Build size depends on which head is used: 330 x 330 x 600 mm with one extruder, 300 x 330 x 600 mm with both. Siblings Guider 3 (300x250x340) and Guider 3 Plus (350x350x600) are both single-extruder. A refurbished SKU exists alongside the new machine, so check which one a price refers to[1][3][4] | The 300 °C chamber and 300 °C build plate are what separate this from the Funmat Pro 410 (90 °C chamber, 160 °C plate) — both quote a 500 °C extruder. Three-phase power is required (380 V or 200 V), which the 410 does not need[2][5] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 330 x 330 x 600 mm with a single extruder; 300 x 330 x 600 mm when both extruders are in use[1] | 610 x 508 x 508 mm (24 x 20 x 20 in)[2] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 635 x 550 x 1070 mm; packaging 775 x 690 x 1235 mm[1] | 1710 x 1425 x 2350 mm including the warning lights[2] |
| Net weight (kg) | 70 kg net, 86 kg gross[1] | 1450 kg[2] |
| Frame construction & material | Enclosed professional chassis; FlashForge describes a lightweight, stable structure for high-speed operation[1] | Servo control system on high-precision ball screws; liquid cooling plus fans[2] |
| Enclosure: open / enclosed; panel material; door/lid | Closed design with an air filter fitted[1] | Fully enclosed printing chamber with a double-layer thickened heat-insulated front door and a heat-resistant shield[2] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Not documented | Up to 300 °C chamber temperature (manufacturer specification, actively heated)[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with two extruders, per a third-party buyer's guide. FlashForge's own spec table does not state the kinematics[6][1] | Servo-driven ball-screw motion system; two nozzles[2] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-500 mm/s printing speed, 500 mm/s maximum travel speed (manufacturer figures)[1] | 160 mm/s maximum print speed (manufacturer figure). Travel: XY 400 mm/s, Z 50 mm/s[2] |
| Max acceleration (claimed, mm/s²) | 20,000 mm/s2 maximum (manufacturer claim)[1] | Not documented |
| Vibration Compensation / Input Shaping | ||
| Input shaping supported? Implementation (Klipper IS / Marlin ZV / proprietary) | Active vibration compensation, which FlashForge says was enhanced for this model. Implementation not named[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Two extruders[1] | Two nozzles, 1.75 mm filament[2] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | 350 °C maximum extruder temperature (manufacturer claim)[1] | 500 °C maximum nozzle temperature (manufacturer specification)[2] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | 0.4 mm default; 0.6 and 0.8 mm optional[2] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C bed setting supported (manufacturer figure)[1] | Up to 300 °C heated build plate[2] |
| Bed surface (material, texture, coating), single/double-sided | Replaceable flexible steel-plate platform, magnetic. No glass bed[1] | Flexible build plates with a vacuum adsorption system[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Full-auto one-click levelling; probe technology not named[1] | Auto levelling; probe technology not named[2] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Filament run-out reminder[1] | Not documented |
| Spool holder location & max spool size; drybox compatibility | Not documented | Four independent sealed filament chambers with active heating to 50 °C and dry compressed air; four spools up to 3 kg each[2] |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | Air filter fitted; filter media not specified in the FlashForge table[1] | Not documented |
| Electronics & Power | ||
| Input voltage (110/220 V, switch or auto) | AC 100-240 V, 50/60 Hz[1] | Three phase: 380 V 30 A/phase or 200 V 50 A/phase, 50-60 Hz[2] |
| Total rated power draw | 850 W maximum[1] | 15 kW maximum[2] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; slicers are Orca-Flashforge and FlashPrint 5, with OrcaSlicer listed as compatible[1] | Proprietary; slicing is INTAMSUITE (Windows only)[2] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touch LCD[1] | 10-inch touchscreen[2] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Ethernet, Wi-Fi, plus cloud[1] | Wi-Fi, Ethernet, USB[2] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | Remote camera monitoring and time-lapse video supported; resolution not published[1] | Not documented |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Power-loss recovery supported; mechanism not published. Automatic shutdown also supported[1] | Not documented |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, ASA, PETG, CoPA, PLA-CF, PETG-CF, PAHT-CF, PAHT-GF, PET-CF, PET-GF, PA12-CF, PA-CF, PA-GF, NexPA-CF25[1] | PEI (ULTEM) 9085 and 1010, PEEK, PEEK-CF, PEEK-GF, PEKK, PPSU, PPS, PC, PC-ABS, PPA-CF, PPA-GF, PA6/66, PA6-CF, PA12, PA12-CF, ABS+, ABS, ASA and others[2] |
| Safety | ||
| Certifications (UL/ETL/CE/FCC — verify, don't assume) | CE, FCC, RoHS (as printed in FlashForge's own spec table)[1] | CE, FCC, SGS; safety design to EN60204[2] |
| Hardware safety: fusing, strain reliefs, belt covers, pinch points | Not documented | Independent safety PLC, electromagnetic safety door lock, over-temperature protection, overload protection, emergency stop button, three-colour warning light. Safety standard EN60204[2] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Resolution XY 12.5 um, Z 1.25 um (manufacturer specification)[2] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor
- Intamsys Funmat Pro 610 HT product listing top3dshop.com · 2026-08 · vendor
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Intamsys Funmat Pro 410 product listing top3dshop.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review