3D Printing InfoPrinter comparison
FlashForge Guider 3 Plus vs Sovol SV06 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Guider 3 Plus comparisonsMore Sovol SV06 Plus comparisons
| Property | FlashForge Guider 3 PlusINDUSTRIAL | Sovol SV06 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | INDUSTRIAL | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | FlashForge Guider 3 Plus[1] | Sovol SV06 Plus[2] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Larger sibling of the Guider 3 (300x250x340) and distinct from the Guider 3 Ultra, which is dual-extruder, 330x330x600 and 350 °C. Guider 3 Plus is single-extruder and quoted at 250 mm/s[1][3][4] | Larger sibling of the SV06 (220x220x250). Distinct from the SV06 Plus ACE, which is 300x300x350 mm, runs Klipper on an RK3308, adds a 4.3-inch touchscreen, camera and ceramic hotend. The 340 mm vs 350 mm Z figure is the cleanest way to tell the two apart in a spec box[2][5] |
| Market position: superseded? successor announced? | 3DJake shows it sold out and no longer stocked[1] | Delisted by Sovol; the current collection carries the SV06 Plus ACE instead. 3DJake shows it sold out and no longer stocked[6][2] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 350 x 350 x 600 mm advertised[1] | 300 x 300 x 340 mm advertised (note: the ACE version is 350 mm in Z)[2] |
| Frame construction & material | Fully assembled professional chassis. Z axis runs on 16 mm guides with 16 mm TBI ball screws on both sides; the platform is rated to carry 30 kg[1] | Open frame with linear-rail motion, supplied as an assembly kit. One 3DJake purchaser reports construction defects and linear-axis stability problems[2] |
| Enclosure: open / enclosed; panel material; door/lid | Enclosed, with HEPA 13 air filtration and two sealed filament chambers of 1 kg each[1] | Open frame, no enclosure[2] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | Not documented | Cartesian i3 bedslinger[2] |
| Z-axis: leadscrew count & type, sync mechanism, anti-backlash | Double Z-axis ball screw, 16 mm TBI on both sides, on 16 mm guides[1] | Not documented |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 250 mm/s maximum (manufacturer claim)[1] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct-drive extruder, single[1] | Direct-drive extruder, single[2] |
| Hotend & Nozzle | ||
| Stock nozzle size & sizes included in box | 0.4, 0.6 and 0.8 mm nozzles available[1] | Not documented |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Two sealed filament chambers, 1 kg per chamber[1] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | HEPA 13 filtration[1] | Not documented |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB, Wi-Fi, LAN[1] | USB connection and mini-SD card[2] |
| Materials Support | ||
| Officially supported filament list | PLA, ABS, HIPS, nylon, PETG, PC, ASA, and glass/carbon-fibre reinforced grades[1] | 1.75 mm filament; no per-material list published on the listing[2] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | Less than 50 dB claimed by the manufacturer. No independent measurement; distance and method not stated[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- FlashForge Guider 3 Plus technical data table 3djake.com · 2026-08 · vendor
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- FlashForge Guider 3 technical data table 3djake.com · 2026-08 · vendor
- Flashforge Guider 3 Ultra product page (refurbished listing) flashforge.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor