3D Printing InfoPrinter comparison
FlashForge Creator 5 vs Sovol SV07 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 comparisonsMore Sovol SV07 Plus comparisons
| Property | FlashForge Creator 5TOOLCHANGER | Sovol SV07 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | TOOLCHANGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5, sold as "Creator 5 4-Toolheads Multi-Color 3D Printer"[1][2] | Sovol SV07 Plus[3][4] |
| Release date (announcement and actual shipping) | Announced with a $10 deposit programme; shipping to deposit backers by 19 May 2026. One secondary source puts general release in early May 2026[5][6] | Not documented |
| Launch MSRP (USD) | $649 early-bird (deposit price, open until 20 June 2026); $799 standard MSRP[5][6] | Not documented |
| Street price (USD; dated snapshot per entry) | $799.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | $199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Paired with the Creator 5 Pro at $949, which adds a sealed enclosure, 65 °C active chamber heating and HEPA13 + carbon filtration. Motion system, 256 mm build volume, four toolheads, 600 mm/s and 30,000 mm/s2 are the same on both, so enclosure and chamber are the only reliable discriminators[1][7][5][6][2] | Large-format version of the SV07. Distinguishers: 300x300x350 mm vs 220x220x250, 600 W MeanWell vs 350 W, 25-point levelling, and USB Type-C added. Both are quoted at 500 mm/s and 300 °C. Note Sovol's own comparison table gives 300x300x350 while some listings write 300x300x340[4][3] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection[8] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[5][6][9] | 300 x 300 x 350 mm advertised[3][4] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 632 x 532 x 735 mm[3] |
| Net weight (kg) | Not documented | 14 kg[3] |
| Frame construction & material | CoreXY frame; FlashForge does not publish a frame-material breakdown and no dimensions or weight have been published for this model[5][6] | Open frame, assembly kit[4] |
| Enclosure: open / enclosed; panel material; door/lid | Open frame. No enclosure, no chamber heating and no filtration[5][6][9] | Open frame, no enclosure[4] |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent toolheads on a FlashSwap changer. FlashForge claims a physical head swap in about 7 seconds[5][6][9] | Cartesian i3 bedslinger[4] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum, reported by both secondary sources as a travel-speed figure (manufacturer claim)[5][6] | Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range[4][3] |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[5][6] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Dual-gear direct drive with planetary gearbox[4] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend to 300 °C, 0.4 mm nozzle[4][3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=300 °C claimed[4][3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[5][6] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[5][6] | <=100 °C claimed[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; FlashForge does not name the probe technology[1] | 25-point automatic levelling; probe technology not stated[4] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[4] |
| Filament Handling & Detection | ||
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads swapped physically rather than shared through one nozzle, which FlashForge markets as zero purge waste and up to 500% faster multi-colour printing[1][5] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Enhanced triple cooling (Sovol's wording; no fan detail published)[4] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | Not documented | 600 W MeanWell, 24 V, 115/230 V AC input[4][3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[6] | Klipper[4] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 5-inch touchscreen[4] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[5][6] | Wi-Fi, USB and USB Type-C[4][3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps. A camera module is also sold separately at $29.90, so verify whether a given SKU ships with it[5][6][2] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[3][4] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review