3D Printing InfoPrinter comparison
FlashForge Creator 5 Pro vs Sovol SV06 Plus ACE
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 Pro comparisonsMore Sovol SV06 Plus ACE comparisons
| Property | FlashForge Creator 5 ProTOOLCHANGER | Sovol SV06 Plus ACEBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | TOOLCHANGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[1][2] | Sovol SV06 Plus ACE 3D Printer[3][4] |
| Release date (announcement and actual shipping) | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[5][6] | Not documented |
| Launch MSRP (USD) | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[5][6] | Not documented |
| Street price (USD; dated snapshot per entry) | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | $299.00 on sovol3d.com against a $349.00 compare-at price, in stock and shipping from US/EU/CA/AU/UK/CN warehouses, checked Aug 2026[3][4] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[1][5][6] | Larger sibling of the SV06 ACE ($239, 220x220x250). Differs from the non-ACE SV06 Plus by Z height (350 vs 340 mm), Klipper on an RK3308, ceramic-plate hotend, 4.3-inch capacitive touchscreen and a camera. Notably it has NO power-loss recovery, which the older SV06 did have[3][4][7] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[5][6][8] | 300 x 300 x 350 mm advertised[3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | Not documented | 510 x 575 x 710 mm including screen and filament holder[3] |
| Frame construction & material | Rigid frame with a fully sealed enclosure; no dimensions or weight published[1][6] | Open i3-style frame; Sovol publishes no frame-material breakdown[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[1][5][6] | Open frame, no enclosure[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[1][5][6] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent FlashSwap toolheads[5][6] | Cartesian i3 bedslinger[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum (manufacturer claim)[1][5][6] | 500 mm/s maximum (manufacturer claim)[3] |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[5][6] | 15,000 mm/s2 maximum (manufacturer claim)[3] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Planetary double-gear direct drive, 1:7.5 reduction[3] |
| Gear ratio & drive gear material | Not documented | 1:7.5[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | Ceramic heating plate hotend; 0.4 mm nozzle included, 0.6 and 0.8 mm optional[3] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | <=300 °C claimed[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[5][6] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[6] | 100 °C claimed[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Double-sided textured PEI plate[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; probe technology not named[1] | Automatic levelling (Sovol calls the ACE upgrade an added automatic levelling function); probe technology not named on this page[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament run-out sensor fitted; type and location not published[3] |
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[1][5] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[1][5][6] | Not documented |
| Electronics & Power | ||
| Host computer (SoC, RAM, storage) if firmware runs on embedded Linux | Not documented | Rockchip RK3308 ("3308 chip"), 512 MB RAM, 8 GB eMMC[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W / 24 V, 100-240 VAC 50/60 Hz[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[6] | Klipper. Sovol does not publish the fork or version on the product page. OTA updates supported[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | Not documented | 4.3-inch capacitive touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[5][6] | Wi-Fi 2.4 GHz only, WPA2 only (WPA3 explicitly not supported)[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps[5][6] | Built-in camera, default 640x480, maximum 1280x720 (Sovol writes it as 1080x720P)[3] |
| Power-Loss & Interruption Recovery | ||
| Power-loss recovery: mechanism (how is state saved? capacitor / eeprom / file on shutdown?) | Not documented | None. Sovol's own spec table states "Power Loss Recovery: None" for this model[3] |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, PETG, TPU, PVA[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[5] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- Sovol SV06 Plus ACE 3D Printer product page sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- Sovol SV06 Plus technical data table 3djake.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review