3D Printing InfoPrinter comparison
FlashForge Creator 5 Pro vs LulzBot TAZ Pro Long Bed
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 5 Pro comparisonsMore LulzBot TAZ Pro Long Bed comparisons
| Property | FlashForge Creator 5 ProTOOLCHANGER | LulzBot TAZ Pro Long BedBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | LulzBot |
| Class | TOOLCHANGER | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 5 Pro, sold as "Creator 5 Pro 4-Toolheads Enclosed Multi-Color 3D Printer"[1][2] | LulzBot TAZ Pro Long Bed 3D Printer[3] |
| Release date (announcement and actual shipping) | Launched alongside the Creator 5; one secondary source gives an estimated early-Q3 2026 release for the Pro specifically, while the joint launch report of 19 May 2026 covers both[4][5] | Not documented |
| Launch MSRP (USD) | $799 early-bird (deposit price, open until 20 June 2026); $949 standard MSRP[4][5] | Not documented |
| Street price (USD; dated snapshot per entry) | $949.00 on flashforge.com, in stock, with $100 auto-applied in cart, checked Aug 2026[1][2] | $7,995.00 at MatterHackers, listed as currently unavailable, checked Aug 2026[3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Enclosed version of the Creator 5. The $150 difference buys the enclosure, 65 °C active chamber heating, air filtration and engineering-material support. Build volume, toolhead count, speed and acceleration are identical to the Creator 5[1][4][5] | Not simply a longer TAZ Pro. The Long Bed ships the Asteroid 285 tool head with a 1.2 mm nozzle, a 0.3-0.9 mm equipped layer range, an 80 °C bed cap (vs 110 °C), 150 mm/s travel (vs 300) and BLTouch 32-point mesh levelling (vs 4-point contact). Bed material also differs: blue spring-steel magnetic flex rather than glass with PEI film[3][6] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 256 x 256 x 256 mm[4][5][7] | 282 x 582 x 285 mm[3] |
| Frame construction & material | Rigid frame with a fully sealed enclosure; no dimensions or weight published[1][5] | Open frame; GT2 belt drive with Igus SST rods and polymer bushings[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with door and top cover, with continuous airflow and dual-layer H13 HEPA plus coconut-shell activated carbon filtration[1][4][5] | Open frame, no enclosure[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively heated with adaptive circulation (manufacturer claim — a heater setpoint, not a measured passive figure)[1][4][5] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | CoreXY with four independent FlashSwap toolheads[4][5] | Cartesian bedslinger[3] |
| Stepper drivers (exact model e.g. TMC2209; UART/SPI; sensorless homing?) | Not documented | Trinamic TMC2130[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 600 mm/s maximum (manufacturer claim)[1][4][5] | Not documented |
| Max travel speed | Not documented | 150 mm/s maximum travel speed, firmware-limited[3] |
| Max acceleration (claimed, mm/s²) | 30,000 mm/s2 maximum (manufacturer claim)[4][5] | Not documented |
| Extruder | ||
| Type (direct drive / bowden) & design name | Not documented | Asteroid 285 tool head[3] |
| Filament diameter | Not documented | 2.85 mm standard, 1.75 mm optional[3] |
| Hotend & Nozzle | ||
| Max nozzle temp claimed AND firmware max temp limit (both values) | Not documented | 290 °C maximum, firmware-limited[3] |
| Stock nozzle size & sizes included in box | Not documented | 1.2 mm GammaMaster steel[3] |
| Stock nozzle material (brass / hardened steel / plated copper / composite tip) | Hardened steel nozzles as standard[4][5] | GammaMaster steel[3] |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 120 °C maximum (manufacturer claim)[5] | 80 °C maximum bed temperature — notably lower than the base TAZ Pro[3] |
| Bed heater type (DC/AC mains) & wattage | Not documented | 360 W, 24 V silicone bed heater[3] |
| Bed surface (material, texture, coating), single/double-sided | Not documented | Blue spring-steel magnetic flex bed system[3] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Fully automatic calibration and levelling; probe technology not named[1] | BLTouch, 32-point automatic mesh calibration[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 32 points[3] |
| Filament Handling & Detection | ||
| Filament runout sensor (type, location) | Not documented | Filament sensor with runout and stripping detection[3] |
| Multi-material/multi-color capability or official upgrade path | Four independent toolheads, physically swapped; FlashForge markets zero purge waste[1][4] | Not documented |
| Cooling & Air Handling | ||
| Chamber/exhaust fan & filtration (activated carbon / HEPA) | H13 HEPA plus coconut-shell activated carbon, dual layer, with continuous airflow[1][4][5] | Not documented |
| Electronics & Power | ||
| Mainboard model & MCU (exact chip markings if teardowns exist) | Not documented | 32-bit Archim 2.2b with Trinamic TMC2130 drivers[3] |
| PSU (brand, wattage, rail voltage) | Not documented | 500 W 24 V Mean Well, auto-switching, 100-240 VAC input[3] |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named by FlashForge. Supported slicers are Flash Studio, Orca-Flashforge and OrcaSlicer[5] | Marlin[3] |
| Connectivity, UI & Camera | ||
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | Dual-band Wi-Fi 2.4 GHz + 5 GHz, LAN, USB[4][5] | USB serial; 16 GB flash drive included for standalone printing[3] |
| Camera: built-in / optional? Resolution & framerate (verify — marketing often omits real fps) | 1080p camera at 30 fps[4][5] | Not documented |
| Materials Support | ||
| Officially supported filament list | Not documented | PLA, TPU, ABS, PETG, PVA, PVB, nylon, PC and other materials below 290 °C[3] |
| Noise & Power Consumption | ||
| Noise: claimed dB and independently measured dB (distance/method) | 55 dB claimed by the manufacturer. No independent measurement found; distance and method not stated[4] | Not documented |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | Not documented | 1 year standard with extended options. Made in the USA[3] |
| Independently Measured Performance | ||
| Dimensional accuracy measurements (third-party, with numbers) | Not documented | Positional resolution 0.01 mm in X/Y and 0.002 mm in Z (manufacturer specification)[3] |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 5 Pro 4-Toolheads product page flashforge.com · 2026-08 · vendor
- Flashforge store search results for Creator 5 (live prices) flashforge.com · 2026-08 · vendor
- LulzBot TAZ Pro Long Bed 3D Printer listing matterhackers.com · 2026-08 · vendor
- Flashforge Creator 5 and Creator 5 Pro launch report 3dprinting.com · 2026-08 · review
- Flashforge Creator 5 and 5 Pro breakdown antonmansson.com · 2026-08 · review
- LulzBot TAZ Pro product page buy.lulzbot.com · 2026-08 · vendor
- Flashforge printer buyer's guide, 5M to Creator 5 eolasprints.com · 2026-08 · review