3D Printing InfoPrinter comparison
FlashForge Creator 4 vs Sovol SV07 Plus
Compare hardware, build volume, printing specifications, dated prices and sources.
2 selected · all documented properties
Open these two in the interactive comparisonMore FlashForge Creator 4 comparisonsMore Sovol SV07 Plus comparisons
| Property | FlashForge Creator 4IDEX | Sovol SV07 PlusBEDSLINGER |
|---|---|---|
| Identity | ||
| Brand | FlashForge | Sovol |
| Class | IDEX | BEDSLINGER |
| Identity & Market | ||
| Manufacturer & exact marketed model name (verify the exact product identity first) | Flashforge Creator 4, sold in A and S configurations (Creator 4A, Creator 4S)[1] | Sovol SV07 Plus[2][3] |
| Street price (USD; dated snapshot per entry) | $10,999.00 at Top 3D Shop with a 2-3 week lead time, checked Aug 2026[1] | $199 at 3D Printers Online Store, reduced from $379, but Out of Stock, checked Aug 2026. Sovol's own comparison quotes $259 sale / $309-379 regular[2][3] |
| Variants & sibling models — and how to tell them apart (spec-contamination risk) | Two factory configurations that share the chassis but not the temperature ceiling: Creator 4A ships 2 x HT extruders (320 °C max, no composite support), Creator 4S ships 1 x HT + 1 x HS (360 °C max, supports PA-CF, PA-GF, PP-CF, PPS-CF). A third extruder type, F, is rated 265 °C and intended for flexibles. Any published "360 °C" figure applies only to the HS head[1] | Large-format version of the SV07. Distinguishers: 300x300x350 mm vs 220x220x250, 600 W MeanWell vs 350 W, 25-point levelling, and USB Type-C added. Both are quoted at 500 mm/s and 300 °C. Note Sovol's own comparison table gives 300x300x350 while some listings write 300x300x340[3][2] |
| Market position: superseded? successor announced? | Not documented | Delisted by Sovol; not present in the current 3D-printer collection[4] |
| Physical & Frame | ||
| Build volume X×Y×Z (mm) — advertised vs actually usable | 400 x 350 x 500 mm[1] | 300 x 300 x 350 mm advertised[2][3] |
| Machine footprint (mm) & clearance needed (cable/spool overhang) | 840 x 675 x 1000 mm (1050 mm on the stand). FlashForge specifies an installation space of at least 1400 x 1500 x 1600 mm[1] | 632 x 532 x 735 mm[2] |
| Net weight (kg) | 90 kg net[1] | 14 kg[2] |
| Frame construction & material | Fully enclosed professional chassis on a stand[1] | Open frame, assembly kit[3] |
| Enclosure: open / enclosed; panel material; door/lid | Fully enclosed with HEPA 13 filtration and an actively controlled chamber[1] | Open frame, no enclosure[3] |
| Passive chamber temperature reached (if enclosed; measured values preferred) | Up to 65 °C, actively controlled (manufacturer claim)[1] | Not documented |
| Kinematics & Motion Hardware | ||
| Kinematics (bedslinger i3 / CoreXY / other) | IDEX — two independently driven extruders on the same gantry[1] | Cartesian i3 bedslinger[3] |
| Speed & Acceleration | ||
| Max print speed (claimed, mm/s) | 10-200 mm/s, adjustable per material. On the 4S the HS head is quoted 100-150 mm/s and the HT head 100-200 mm/s (manufacturer figures)[1] | Up to 500 mm/s (manufacturer claim); the retailer listing gives a 250-500 mm/s working range[3][2] |
| Extruder | ||
| Type (direct drive / bowden) & design name | Direct drive, two independent extruders, interchangeable modules (F / HT / HS)[1] | Dual-gear direct drive with planetary gearbox[3] |
| Hotend & Nozzle | ||
| Hotend design (proprietary/standard; quick-swap mechanism?) | Not documented | All-metal hotend to 300 °C, 0.4 mm nozzle[3][2] |
| Max nozzle temp claimed AND firmware max temp limit (both values) | Depends on the fitted extruder module: F 265 °C, HT 320 °C, HS 360 °C[1] | <=300 °C claimed[3][2] |
| Stock nozzle size & sizes included in box | 0.4 mm default; 0.6 and 0.8 mm optional[1] | Not documented |
| Heated Bed & Surface | ||
| Max bed temp claimed AND firmware limit | 130 °C maximum (manufacturer claim)[1] | <=100 °C claimed[2] |
| Leveling & Z-Offset | ||
| Auto bed leveling: probe technology (inductive / strain gauge / load cell / touch probe) | Automatic bed levelling; FlashForge does not name the probe technology in this spec table[1] | 25-point automatic levelling; probe technology not stated[3] |
| Mesh grid size (probe point count — firmware evidence) | Not documented | 25 points (manufacturer claim)[3] |
| Filament Handling & Detection | ||
| Spool holder location & max spool size; drybox compatibility | Two spool bays, 1 kg and 2 kg capacity[1] | Not documented |
| Cooling & Air Handling | ||
| Part-cooling fan(s): count, size, ducting design | Not documented | Enhanced triple cooling (Sovol's wording; no fan detail published)[3] |
| Electronics & Power | ||
| PSU (brand, wattage, rail voltage) | Not documented | 600 W MeanWell, 24 V, 115/230 V AC input[3][2] |
| Input voltage (110/220 V, switch or auto) | AC 100-130 V / 200-240 V, 50-60 Hz, 30 A overcurrent protection[1] | Not documented |
| Total rated power draw | 2320 W rated[1] | Not documented |
| Firmware & Openness | ||
| Firmware base & current version (Klipper fork / Marlin fork / proprietary) | Not named; the supported slicer is FlashPrint[1] | Klipper[3] |
| Connectivity, UI & Camera | ||
| Display: size, type, touch? | 7-inch touchscreen, 1024 x 600[1] | 5-inch touchscreen[3] |
| WiFi (band/standard), Ethernet, USB ports, SD/flash-drive | USB flash drive, Ethernet, Wi-Fi[1] | Wi-Fi, USB and USB Type-C[3][2] |
| Materials Support | ||
| Officially supported filament list | Standard and engineering plastics on the HT head; the HS head adds PA-CF, PA-GF, PP-CF and PPS-CF. Materials such as PC, PA and carbon fibre are the stated targets for the 130 °C bed[1] | PLA, PETG, TPU, ABS, wood-filled; Sovol also lists carbon fibre[2][3] |
| Reliability, Support & Ecosystem | ||
| Warranty length & support reputation (evidence, not vibes) | 12 months on the printer, 3 months on extruder parts[1] | Not documented |
Manufacturer claims, independent measurements, packages and test conditions retain their source wording. FDM linear speed and resin vertical speed use different units and are not directly comparable. Unknown values are marked “Not documented”. Prices and source dates remain historical snapshots; check the linked guide for product details. Differences highlight text, not a universal winner.
Sources for this comparison
- Flashforge Creator 4 (A/S) product listing with full spec table top3dshop.com · 2026-08 · vendor
- Sovol SV07 Plus Large Klipper 3D Printer listing 3dprintersonlinestore.com · 2026-08 · vendor
- SV07 vs SV07 Plus comparison (Sovol blog) sovol3d.com · 2026-08 · vendor
- Sovol 3D-printer collection product feed (live prices and stock) sovol3d.com · 2026-08 · vendor